GAB Version CHEAP.0 Tecumseh OHH50 172cc 5HP

[bob58o]

So proud of myself. Lol

 

[bob58o]

Need a shorter pipe for the next section.

 

[bob58o]

Can't call it an exhaust til it runs!
I got exhaust gasket gunk.
Need to trim it up.

I'll run with my modded air box and diy exhaust to keep the Cheap.0 theme alive!!

 

[chancer]

Check these out:
http://www.walmart.com/ip/Halex-641...62476&wl11=online&wl12=21797341&wl13=&veh=sem
Remember the cool looking Conduit "sweeps" you had before. they make all that stuff in threaded "rigid" conduit, smooth couplings to.
No Offense you asked... but I think it looks like a drunken Plumber did it.
[edit] and You were tending Bar!

---------- Post added at 06:00 PM ---------- Previous post was at 05:57 PM ----------

http://www.walmart.com/ip/Halex-6947451-.-75-inch-Rigid-Conduit-Coupling/40771603

---------- Post added at 06:04 PM ---------- Previous post was at 06:00 PM ----------

Wait I see that IS what you had. Just get another coupler and a 45°.
I like the conduit fittings better than the gas pipe fittings.

 

[bob58o]

I don't really care too much bout looks.
I want to see how it works.

I like the adjustability.
I can make it a two stage and go up to 1 pipe/conduit.

 

[Poboy kartman]

I don't really care too much bout looks.

Wanna meet my ex?

 

[Hellion]

...No Offense you asked... but I think it looks like a drunken Plumber did it.

I like the conduit fittings better than the gas pipe fittings.

I'm with him ^^^. The artistry of the sweeping exhaust pipe is gone.

Have you considered flexible gooseneck tubing? They make it for electrical conduit as well as exhaust...

 

[bob58o]

These are not cheap.
http://www.gordonelectricsupply.com...ocess~search?gclid=CNPdpsuLwM4CFQsuaQod3p8FsQ

 

[chancer]

These are half that
http://www.walmart.com/search/?query=3/4 INCH 45 RIGID ELBOW
and a coupling
http://www.walmart.com/ip/Thomas-Betts-3-4-Rigid-Coupling-TRC341/39866930

 

[bob58o]

What I tried to find was a smooth looking Rigid conduit 45 elbow (close coupler female threaded).
I couldn't find the longer 45 bends in the store.

I'm not positive the length of the long curved 45 would be correct.

I suppose I could cut and thread, but no die (I don't think)

---------- Post added at 10:52 AM ---------- Previous post was at 10:49 AM ----------

US Postal Service Sunday Delivery is the single greatest achievement by any Postal Service in my life time.

Somebody could get Dominos on the Moon and if it wasn't Sunday, no big deal!

---------- Post added at 10:56 AM ---------- Previous post was at 10:52 AM ----------

Yesterday I got the full (too long exhaust).
The air filter/adapter.
A new, but same $8 tach.
Head gasket.
Side cover gasket.

Waiting on the male threaded exhaust flange, but I will try the Plumbers special and modded air box first.

 

[bob58o]

E3 vs conventional spark Plug
Spark and Great Balls of Fire
Fact or Fiction
https://www.youtube.com/watch?v=rTRy_pVtE1g

http://www.homedepot.com/p/E3-13-16-in-Spark-Plug-for-4-Cycle-Engines-E3-22/202542454

 

[cavfire]

You could piece together fittings to get the general length and shape you wanted, and then see if an electrical contractor could bend one out of a single piece of RMC or IMC.

 

[bob58o]

This is how to fit a 22" long under the seat exhaust on a Tec Power Sport OHH50 powered TS500 mini bike.

Like a glove!!!

Want a pipe clamp/ strap to support it under the seat/above the fender.

 

[bob58o]

Flange.

 

[bob58o]

Tail pipe angle

 

[bob58o]

HomeStore

Plug $6
Air Filter is $14

Going to use gasket maker and I hate taking stuff off.

So skipping the modded air box for meow.
Don't want to use the one I drenched in oil on day 1.
Don't want to spend $14 on a test.

 

[bob58o]

Thanks for the support.

 

[bob58o]

I have more hair on my back than on my head.
I have been buying smokes 18 years. Legally for 15 years.

And now you want to ask for my ID???
DaFugAttaHere!

 

[bob58o]

More stuff.
$5 for rubber fiber for gas/oil/coolant 1/32" thick gasket material
10" x 26"

$3.50 for carb clean.

 

[bob58o]

Carb - Air Filter Adapter Gasket