wolffhunter
New member
I have a fs509 cateye mini bike and am looking for a complete body kit for it. Any ideas? i have tried all the sites for parts and to no avail for A COMPLETE SET. 
fs509 parts?
- Thread starter wolffhunter
- Start date
- Status
mckutzy
Well-known member
Hello an welcome...
Post some pics of your bike, to help us tell what it looks like, also update your profile with your location.
Post some pics of your bike, to help us tell what it looks like, also update your profile with your location.
really?
it took me a minute and a half to find every single body part:
http://www.scooterpart.net/index.php?model=6&page=1&sort=3d
both side panels, head, windshield, both mudguards and the seat fairing...
So yeah.. not a complete set, but you're able to put all of these in your cart to make it a set, don't you?
'sid
it took me a minute and a half to find every single body part:
http://www.scooterpart.net/index.php?model=6&page=1&sort=3d
both side panels, head, windshield, both mudguards and the seat fairing...
So yeah.. not a complete set, but you're able to put all of these in your cart to make it a set, don't you?
'sid
wolffhunter
New member
fs509
some of these part dealers wont ship to canada....
---------- Post added at 12:59 PM ---------- Previous post was at 12:57 PM ----------
right now my bike is bare bones. all fairings have been destroyed by other owner. so i had to scrap them all. i have done my research and know this is the fs 509 cateye. as for location. i am in ontario canada as for pics , how do you upload from your computer to this site?
---------- Post added at 01:18 PM ---------- Previous post was at 12:59 PM ----------
yep easy, however there was one parts dealer that sold the complete set, not just individual parts scattered all over the place. . and i do believe that this company does not ship internationaly....?
some of these part dealers wont ship to canada....
---------- Post added at 12:59 PM ---------- Previous post was at 12:57 PM ----------
right now my bike is bare bones. all fairings have been destroyed by other owner. so i had to scrap them all. i have done my research and know this is the fs 509 cateye. as for location. i am in ontario canada as for pics , how do you upload from your computer to this site?
---------- Post added at 01:18 PM ---------- Previous post was at 12:59 PM ----------
yep easy, however there was one parts dealer that sold the complete set, not just individual parts scattered all over the place. . and i do believe that this company does not ship internationaly....?
Last edited:
wolffhunter
New member
fs509
here are some pics of it as it sits right now.
here are some pics of it as it sits right now.
Attachments
-
100_2489.jpg -
100_2490.jpg -
100_2491.jpg -
100_2492.jpg -
100_2493.jpg
wolffhunter
New member
fs509
and a few more pics
and a few more pics
Attachments
-
100_2497.jpg -
100_2495.jpg
mckutzy
Well-known member
That's a pocket bike...
There should be plenty of stuff out there, and most should be able to fit that frame...
There should be plenty of stuff out there, and most should be able to fit that frame...
wolffhunter
New member
yep, i know what it is. just to get the parts from the states to canada is a whole new ball game.
mckutzy
Well-known member
I know these guys sell pocket bikes for sure...
I've been wanting to check them out for awhile now... I have a junker and wanted to revamp it.
I'm pretty sure they'll ship...
http://www.sinclairsmotorsports.ca/
I've been wanting to check them out for awhile now... I have a junker and wanted to revamp it.
I'm pretty sure they'll ship...
http://www.sinclairsmotorsports.ca/
wolffhunter
New member
i dont see where on the site that they have any parts for mine listed.?
mckutzy
Well-known member
What I'm saying... For the most part, they are all the same...
Maybe try calling them...
Maybe try calling them...
wolffhunter
New member
fs509
found a few deals , gonna be buying from many companies, however. the bracket for the speedometer, lights and battery assembly bracket needs to be replaced, and i am not able to locate a parts source for it. any ideas?
found a few deals , gonna be buying from many companies, however. the bracket for the speedometer, lights and battery assembly bracket needs to be replaced, and i am not able to locate a parts source for it. any ideas?
Attachments
-
100_2499.jpg -
100_2501.jpg
wolffhunter
New member
fs509
didnt mean to sound rude or anything in my last post but i have done my research , i sold this bike to a friend and he destroyed it , so i got it back and now i have to repair it. so sorry if i sounded rude. before i sold it i got it in rough shape. so ya i have done research on it. but now as it sits the only part i cannot find is the part i last posted. hence the question any ideas?
didnt mean to sound rude or anything in my last post but i have done my research , i sold this bike to a friend and he destroyed it , so i got it back and now i have to repair it. so sorry if i sounded rude. before i sold it i got it in rough shape. so ya i have done research on it. but now as it sits the only part i cannot find is the part i last posted. hence the question any ideas?
wolffhunter
New member
fs509
ok seems like ya'll are not willing to help on this problem. well heres another delima if i might be so crazy in asking for ya'lls help........ as it sits i have an electric start engine (with pull as well) , i have figured out all lights (including signals), i then traced wires back to the engine coil, however i do not see any wires for a start switch at all....... do i have anything wrongly hooked up?
can anyone take a pic of there wiring for the starter switch for the fs509 and where it hooks up for me please?
ok seems like ya'll are not willing to help on this problem. well heres another delima if i might be so crazy in asking for ya'lls help........ as it sits i have an electric start engine (with pull as well) , i have figured out all lights (including signals), i then traced wires back to the engine coil, however i do not see any wires for a start switch at all....... do i have anything wrongly hooked up?
can anyone take a pic of there wiring for the starter switch for the fs509 and where it hooks up for me please?Attachments
-
100_2550.jpg -
100_2549.jpg -
100_2548.jpg -
100_2546.jpg -
100_2544.jpg -
100_2551.jpg -
100_2552.jpg
Last edited:
mckutzy
Well-known member
We're helping as much as I/we can...
These are Chinese pocket bikes... They come and go as far as the types...
They also are fairly simple as far as the layout.
However your model is a bit different than most.
Perhaps removing it all without cutting anything off. Setting it up on a table or piece of plywood, so that the whole thing can be looked at flat and not be a bundle.
Does it have a key switch?... That could be the start....
These are Chinese pocket bikes... They come and go as far as the types...
They also are fairly simple as far as the layout.
However your model is a bit different than most.
Perhaps removing it all without cutting anything off. Setting it up on a table or piece of plywood, so that the whole thing can be looked at flat and not be a bundle.
Does it have a key switch?... That could be the start....
wolffhunter
New member
fs509
yep it has a key switch, 4 wire 2 position. on and off..... has me scratching my head .....
yep it has a key switch, 4 wire 2 position. on and off..... has me scratching my head .....
wolffhunter
New member
fs509
well heres a different plan of attack, i had got given a 48 volt ebike, (junk for this town) lol anyways, i now have the full wire harnes, all controlls, digital speedometer with the signals ect, i am going to remove the existing harness , install the new key, (from ebike) and new wire harness along with the controls from the ebike, and walk through the wire harness to hook up the power and others . hers a few pics of what i have done so far....
well heres a different plan of attack, i had got given a 48 volt ebike, (junk for this town) lol anyways, i now have the full wire harnes, all controlls, digital speedometer with the signals ect, i am going to remove the existing harness , install the new key, (from ebike) and new wire harness along with the controls from the ebike, and walk through the wire harness to hook up the power and others . hers a few pics of what i have done so far....
Attachments
-
100_2557.jpg -
100_2558.jpg -
100_2559.jpg
wolffhunter
New member
well scrap that idea.... back to the drawing board. or maybe a new harness just for this bike......
mckutzy
Well-known member
From what I can see, the original bike has alot of added on stuff... Lights, speedo, mirrors... All stuff that makes it really complicated to diagnose...
Were it me... I'd eather get rid of the whole thing(it is only a pocket bike), rip off all the electric crap, or(if you really **** bent on it) remove all the electrics carefully and mount it to a board to fully see what you have and a better look to diagnose the problem...
Were it me... I'd eather get rid of the whole thing(it is only a pocket bike), rip off all the electric crap, or(if you really **** bent on it) remove all the electrics carefully and mount it to a board to fully see what you have and a better look to diagnose the problem...
wolffhunter
New member
Fs509
the mirrors and stuff was from the ebike i tore apart. i was hoping to use the harness and controlls for the pocket bike. but i cant unless i butcher the harness. ..... if i really feel up too it i might just rig it up somehow. we shall see. but i will post any progress.....cheers and thanks.
the mirrors and stuff was from the ebike i tore apart. i was hoping to use the harness and controlls for the pocket bike. but i cant unless i butcher the harness. ..... if i really feel up too it i might just rig it up somehow. we shall see. but i will post any progress.....cheers and thanks.
- Status