front gear doesn't work properly on differential

Status
Not open for further replies.

PatiencePaysOff

New member
Messages
20
Reaction score
0
I have a lawn tractor, a 6-7 years old columbia to be precise, and it has a problem when I engage the forward gear. What happens is as follows: I engage the 1st speed and the forward gear, and if I don't hold the lever and push it forward a little bit, the lever starts getting stuck and it will move back and forth (while the tractor stalls). It once moved hectically, as in moves/stops/moves/stops rapidly. But now, it stops completely as mentioned above. Is this problem common?
:thumbsup:
 
Last edited:

itsid

Moderator
Staff member
Messages
11,563
Reaction score
261
Location
Ruhrpott [Germany]
check your belt and all bushings and bearings for all the pulleys, especially the idlers and clutch pulley.
Maybe post a pic or two, sometimes a lever gets bent in a weird way (hit a rock?)
sometimes the belt's just worn down too much to transmit the power needed to get going.

If it's nothing of the above I'm afraid to inform you it'll likely be the transaxle (gearbox) itself, namely worn out gears...
soooo maybe that needs some maintenance (or worst case: replacement)

'sid
 
Status
Not open for further replies.
Top