Forklift motor transmission

[Chuechco]

ey guys,
I found a forklift motor on ebay.
http://cgi.ebay.de/Fahrmotoren-Fahr...51?pt=LH_DefaultDomain_77&hash=item4aab39c453
It is a motor that drives the forklift. It has plenty of power (4kW on 24v). I wonder how to get a chaindrive on it. Does the shaft have to be manufactured?
Thats a hydraulic pump motor of a forklift.
http://cgi.ebay.de/Hydraulikpumpe-4...29?pt=LH_DefaultDomain_77&hash=item4aab2c1a31
What will I see when getting of the hydraulic front part of the motor?

 

[EVpower]

ey guys,
I found a forklift motor on ebay.
http://cgi.ebay.de/Fahrmotoren-Fahr...51?pt=LH_DefaultDomain_77&hash=item4aab39c453
It is a motor that drives the forklift. It has plenty of power (4kW on 24v). I wonder how to get a chaindrive on it. Does the shaft have to be manufactured?
Thats a hydraulic pump motor of a forklift.
http://cgi.ebay.de/Hydraulikpumpe-4...29?pt=LH_DefaultDomain_77&hash=item4aab2c1a31
What will I see when getting of the hydraulic front part of the motor?

First, where do you want to put this motor in?

The first motor is sepex motor, and you need a sepex controller and a programer to use this motor
The pump motor is a (series wound) forklift Power steering motor, you will have a problem with the shaft.( leave this one out)

Try and look for an series wound traction motor, as pump motor seam to be a problem with the shaft.

My motor was pump motor, but I spent lost money on modified the shaft as it will be only for racing purpose.

 

[Chuechco]

I want a motor for a go kart.
Are those traction motors too large for that purpose?
http://cgi.ebay.de/Fahrmotoren-Fahr...30?pt=LH_DefaultDomain_77&hash=item4aab2c1a32
Is it series wound?

 

[EVpower]

I want a motor for a go kart.
Are those traction motors too large for that purpose?
http://cgi.ebay.de/Fahrmotoren-Fahr...30?pt=LH_DefaultDomain_77&hash=item4aab2c1a32
Is it series wound?

Yes those are great motor for a kart and it is traction motor from Clark Three wheeler forklift and it is a series wound.

You can easily go up to 72v without modification.

 

[Chuechco]

Can you guess the power of this motor? How do you know it is series wound?

 

[EVpower]

Can you guess the power of this motor? How do you know it is series wound?

I'm a forklift technician and I have a forklift junk yard

 

[Chuechco]

How do you attach a sprocket on it? And again, how much power does this motor have? The datasheet only says, it runs on 24v.