forgot how to install!!

[mario44mag]

I f anyone can please tell me how to install the sprocket, brake, and spacer would be appreciated..
Mario

 

[karl]

You put the spacer on, then sprocket, then drum, then bolts.

 

[kendelrk]

put the bolts through the tire, then the 6 bolt spacer, the 3 bolt drum, the sprocket, and then the nut,

 

[mario44mag]

thx

kinda confusing i will try

 

[mario44mag]

There are alot of nuts on these bolts that act like a spacer? Where do the bolts screw into?
Mario

 

[kendelrk]

there should be a nut per bolt

 

[mario44mag]

ok

Do you by chance know where i see a picture of this put together already? I know you must think i am an idiot but pics would be better..

 

[the-cyborg]

Old school Azusa wheels I have a couple pairs of them.
Wheel>>spacer>>sprocket>>bolt bushings>>brake hub.
Hope that helps.

 

[mario44mag]

pics

do you have any assembled? If i can see it together it would help alot..
Mario

 

[CaptCanadia]

dude it's easy why do you need pics? Just put the spacer on then sprocket then brake. Line up the holes and screw it in...

 

[mario44mag]

ok

The spacer doesn't have any threads so how do bolts stay inside spacer..... What holds all together..

 

[kendelrk]

the bolts get pushed through the spacer, and then the nut on the end of the bolt hold it all tight

 

[CaptCanadia]

the bolts get pushed through the spacer, and then the nut on the end of the bolt hold it all tight

what he said

 

[kendelrk]

you should only have one bolt and nut, unless the guy used a nut inbetween all of the peices

 

[mario44mag]

yes

yeah thats what he did there were nuts in between every piece..thats what confused me.

 

[kendelrk]

id suggest doing it back that way, its probablly because of the sprocket and clutch aligment