u called it r97 ,i took off the head and the piston is seized. it had some oil but it was black
Something real easy you could try is pouring some penetrating oil in around the edge of the piston and let it sit overnight, so it seeps down past the rings.
Then the next day, use a hammer and a piece of wood like 2x2 to drive the piston down. Just start out tapping lightly, all the way around the pistons edge.
Once you get the piston down, you'll be able to see if the cylinder wall is seriously damaged or not. You might be able to just clean it up with some steel-wool, blow/flush all the debris out, wipe some fresh motor oil on the cylinder wall, change your oil, and get another 10 years of use outta that engine... I've fixed several seized pistons like this
