Sounds like it is running lean. I would guess you have either a bad gasket between the carburetor and head. Another possible scenario (would explain having to pour gas into the carburetor before starting) is an obstruction somewhere between the main jet and the fuel tank.
Check for a bad gasket by spraying carburetor cleaner around the intake gasket(s) while the engine is running. If the engine revs up while doing this you have probably found your problem, and you can then replace the gasket(s).
If the problem is a blockage somewhere there are a few common places to check/clean.
-fuel filters
-fuel lines
-diaphragm (if equipped)
-carburetor jet, bowl, and fuel passages.
Hope that helps