Driven Pulley not driving chain

[robertwigfield]

Hey everybody. I am having an issue with my torque converter. The drive shaft spins the driven pully, however I am not getting any power to the axle. It's like the driven pulley and the axel are not connected or something. Click the dropbox link for some pictures and videos.

https://www.dropbox.com/sh/p2js5yjf7tdmane/AABaVHy4Y_Owq72UA6c8wOEza?dl=0

 

[KartFab]

jackshaft?
5/8" jackshaft sprocket?
3/16" key in jackshaft sprocket?
chain on jackshaft sprocket?
axle sprocket?
chain on axle sprocket?
1/4" key on axle sprocket?
1" axle with 1/4" keyway?

check whats not connected/missing from that list

 

[950speed]

First: is the torque converter workin correctly, as in both parts move out when needed.
Second: I,personally would fund bushings instead of stacking so many washers, and if the bolt going into the crank shaft is too long, get a shorter one, but that’s my opinion

If the tc works and moved properly it could just simple be that the key, a small square shaped bar should be in the jack shaft and the small sprocket, take the driven off and check for that

Could be a very simple fix

 

[65ShelbyClone]

The key for your TC's driven unit is either missing or sheared.

And yeah, you really need to do something about that pile of wobbly washers while you're in there.

 

[J.S.@SMS]

Did you remember to install the keys? Also I'd think about cleaning the driven.