Drive wheel and sprocket ?

[Beakersloco]

I recently picked up a cart and its missing the drive sprocket and wheel mount.

I was looking around on ebay and found this and I believe this is exactly what I need for $72. Can anyone recommend another site to get this setup any cheaper ?

 

[kartingizm]

I recently picked up a cart and its missing the drive sprocket and wheel mount.

I was looking around on ebay and found this and I believe this is exactly what I need for $72. Can anyone recommend another site to get this setup any cheaper ?

i couldnt find one cheaper. i think this is the way to go. mkae sure that the bearings are the right size

 

[mckutzy]

here ya go,
http://www.bmikarts.com/item/4.10-3.50-5-Complete-Assembly-Tire-Rim-Sprocket-Brake---260090-6264

 

[Beakersloco]

Thanks I just ordered...

 

[Beakersloco]

Now I have received this and everything appears to line up pretty close except I will need to put 2-3 big washers on before the wheel so that it lines up with the clutch.

Now how to I determine how long a chain I need.

This is the info from the sprocket... my clutch has 10 teeth on it.
3/4" Bore with 3/16" Keyway
#41, 54T Sprocket
4" Brake Drum

Thanks in advance as the way things are coming together I may manage to have both carts fully operational by the end of July if not sooner.

As I also found an old Tiller sitting beside the road and the owner was like its hard to crank, I grabbed it to scrap it but something said try to crank it ... sprayed some carb cleaner in it and played with the choke and she runs. Debating on selling it for $75 or holding on to it as a spare engine. Its got a 5 hp engine ...

Thanks ...

 

[redsox985]

It's a 5HP Briggs flatty. I'd say remove the gov and put it in something that goes fast and screams!

 

[Screendoor]

Keep the Motor dude.

 

[Beakersloco]

Keep the Motor dude.

Just took it off the tiller and will be mounting it on the kart in a few days. And then it will be time to find a chain.

Thanks