Doodlebug 212cc Gearing / Torque Converter help

Status
Not open for further replies.

rman

New member
Messages
11
Reaction score
0
Hey all,

Have a DB30 with a predator 212cc; jetted, filter and straight pipe.

Governor removed, stock valve springs, maxing out at 5300rpm @ 37mph (12t/72t)

Want to go down to a 60t rear sprocket, then I got to reading about torque convertors. It's my understanding they help with both bottom-end and top-end?

I do love the acceleration I have, but have found it to be a bit dangerlus as well. Basically want to increase my top speed without sacrificing too much bottom-end.

Any suggestions as far as gearing and torque convertor?

Sent from my HTC One_M8 using Tapatalk
 

2SlickNick

American Minibikes @ FB
Messages
2,758
Reaction score
32
Location
Mesa, AZ.
I ran my TC on my db30 with 15" tires and 53T axle sprocket and was still able to do a wheelie.
 

rman

New member
Messages
11
Reaction score
0
thanks. looks like I need a significantly smaller rear sprocket than I thought

Sent from my HTC One_M8 using Tapatalk
 
Status
Not open for further replies.
Top