Do i need billet flywheel and rod?

[spoof]

Im running around 6000 rpms on my 212 predator with stock flywheel and rod. Please help.

 

[Doc Sprocket]

Please read- http://www.diygokarts.com/vb/showthread.php?t=16518

 

[OzFab]

Why? How? The stock valve springs should limit you to around 5000rpm... What mods have you done?

 

[spoof]

Im running like 25 pound springs I think not Sure sorry if Im wrong Im not great on these things

 

[OzFab]

Well, that'll do it. Read the thread TS suggested & see what you get from that.

IMO, with 25lb springs, yes, you should get a billet rod & flywheel

 

[tundrabeagle3]

I agree or put your stock springs back in.

 

[spoof]

I agree or put your stock springs back in.

ya ill just do that until i get The money.

 

[zbuck]

I would pull those 25# springs and either put the stock springs (14#) or 18# springs in. 14's should float the valves at 5000 r's, 18's will prevent the valves from floating at a higher r's. Is not the 212 predator the clone for a GX200 Honda? If so it should have 18# valve springs.