Cozzmo1970
New member
- Messages
- 1
- Reaction score
- 0
Hello everyone, so over got a dongfang 200 go kart. I've bought a new 212 and did the internal governor delete process including aluminum fly wheel, 22lb valve springs, header and a nibbi carb. So far the Preformance isn't what I thought it would be. I know it needs tuning and I'll get to that butt it's no faster at the moment. Could it be that the transmission forward/reverse has limits? It has a 30 series converter from Amazon currently. I have a new comet brand converter but I would have to remove the transmission to use it. I would like to change the sprocket on the axle but not sure how to remove the axle, I would like to adjust the axle also because the chain comes off sometimes. Any info would be greatly appreciated.
October 17, 2026
I need to replace my rear sprocket and I can't find any Df gka videos. Other go karts have non welded hubs on all the videos see. I've already got to do allot of fabrication since I removed the f/r transmission and installed a comet tav2 converter. Any ideas?
October 17, 2026
I need to replace my rear sprocket and I can't find any Df gka videos. Other go karts have non welded hubs on all the videos see. I've already got to do allot of fabrication since I removed the f/r transmission and installed a comet tav2 converter. Any ideas?
Last edited by a moderator: