Diy electrical box

Status
Not open for further replies.

Jtsarby

New member
Messages
26
Reaction score
0
Has anyone made their own electrical box to house the electrical connections? Cdi, rectifier, solenoid, etc


Sent from my iPad using Tapatalk
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
Not personally, but have seen many use an ammo box for the electrical box.. to hold all or most of the motors main electrical parts. Mainly on motorcycles though...
They have a sealing lid and are pretty secure for holding stuff in it...
 

Jtsarby

New member
Messages
26
Reaction score
0
Thanks!


Sent from my iPad using Tapatalk

---------- Post added at 10:32 PM ---------- Previous post was at 10:29 PM ----------

I hate the rats nest of wires I have now.



Sent from my iPad using Tapatalk
 

Joe-405

Enjoying New Projects
Messages
2,673
Reaction score
98
Location
U.S.A.
I have made some with fiberglass before.

Just make the pattern with cardboard. And wrap it in aluminum foil then fiberglass over it. I have built a t-bucket hotrod so I got good at fiberglass work really quick.
 

DeathMachine

New member
Messages
358
Reaction score
10
Location
Eastpointe MI
One of the more interesting ones I saw was a tupperware dish, the wires were sealed with silicone. Asked the builder why he used tupperware, he told me it was 10:30 at night, he needed something watertight, and it was handy. Supposed to be temporary but it worked so well he kept it.
 

Bwdeaton

New member
Messages
405
Reaction score
7
Location
Dayton, Ohio



Sent from my iPhone using Tapatalk
 

Jfive

New member
Messages
645
Reaction score
1
Location
Great falls Montana
Look up project box. I bought one for doing a calibration box for my wideband on a turbo project. They come in all sizes and shapes. Have weather proof ones with oring seals.
 

Bwdeaton

New member
Messages
405
Reaction score
7
Location
Dayton, Ohio
The battery is actually disconnected. The bolt is just the keep the terminals together right now


Sent from my iPhone using Tapatalk
 

Jtsarby

New member
Messages
26
Reaction score
0
Thanks jfive. I saw something like that at Lowe's. I'll probably go that direction.


Sent from my iPhone using Tapatalk
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
Another idea is those cheap snaplock plastic containers.. with the silicone rubber seal. They are water tight... and usually can find them at the dollar store...
Some are coloured, others not, just clear... But you can seal outside holes and they become just as sealed.....
 
Status
Not open for further replies.
Top