mckutzy
Well-known member
I decided I needed a new air filter setup. I didnt like the air box thingy and I didnt want it with just the outside cover off. I wanted all the plastic off.
I have a 6.5 clone engine on my bike and over all it just looks off, with the stock look.
I was going to get one of those K&N type filter and adapters, I cant seem to find one locally, and Im currently a little limited on cash. Like what most of my bike is composed of, found or made parts.
I had a look at a go kart website. http://www.affordablegokarts.com/curved-manifold.php
I thought this was a cool Idea. I decided I am going to build something like this, but I didnt want to move the carb, I have the throttle set up already and dont want to disturb it.
Through out this, I didnt modify any stock parts. I used all existing parts like the air filter gaskets.
I made an adapter for the filter to relocate it in a different position. I dont have a piece rad hose yet I will soon.
This is the carb adapter to accept the rad hose. I made some stand off's for the nuts to clamp on.
This is the filter adapter part. I made it from a 1/4-20 allen bolt, some of my election picket stock (3/16" cf steel rod) and a piece of 1-1/4" pipe (it was 6" long, cut in half, used 3" pieces for both parts)
I have a 6.5 clone engine on my bike and over all it just looks off, with the stock look.
I was going to get one of those K&N type filter and adapters, I cant seem to find one locally, and Im currently a little limited on cash. Like what most of my bike is composed of, found or made parts.
I had a look at a go kart website. http://www.affordablegokarts.com/curved-manifold.php
I thought this was a cool Idea. I decided I am going to build something like this, but I didnt want to move the carb, I have the throttle set up already and dont want to disturb it.
Through out this, I didnt modify any stock parts. I used all existing parts like the air filter gaskets.
I made an adapter for the filter to relocate it in a different position. I dont have a piece rad hose yet I will soon.
This is the carb adapter to accept the rad hose. I made some stand off's for the nuts to clamp on.
This is the filter adapter part. I made it from a 1/4-20 allen bolt, some of my election picket stock (3/16" cf steel rod) and a piece of 1-1/4" pipe (it was 6" long, cut in half, used 3" pieces for both parts)