DIY 2 stroke exhaust for 50cc?

Status
Not open for further replies.

angelofhevn

New member
Messages
6
Reaction score
0
im using a Derbi DRD racing engine from 2005
i dont know the sizes of the exaust port and the intake but i will see what i find

what i found was
Bore/Stroke: 39.9 x 40.0 mm (1.6 x 1.6 inches)
17mm carb
Intake port around 17-20mm
dunno what size the exhaust port is
 

sideways

Unfinished projects king.
Messages
1,501
Reaction score
2
Location
Perth, Western Australia
im using a Derbi DRD racing engine from 2005
i dont know the sizes of the exaust port and the intake but i will see what i find

what i found was
Bore/Stroke: 39.9 x 40.0 mm (1.6 x 1.6 inches)
17mm carb
Intake port around 17-20mm
dunno what size the exhaust port is

You're going to have to measure it, it's not hard to do.
 

angelofhevn

New member
Messages
6
Reaction score
0
ï know but i will see what i find on the net about the same engine cause i dont want to take off the pipe and meassure that
 
Status
Not open for further replies.
Top