Cylinder Head 212 predator

[Jfielding6520]

So I was upgrading my carb to the mikuni carb. and my carb rod broke inside my head. Decided that Im going to upgrade my 212 head. any suggestions? price range is 250. so far i have a billet flywheel and arc rod. dyno cam. no governor will be a mikuni carb. my goal is to be faster. i had a bored stock carb before. HELP PLEASE

 

[mckutzy]

What rod broke?
Was this the threaded mounting studs for the carb??
Pics??

 

[Jfielding6520]

yea the rod the holds the stock carb. its not enough thread to get the new screw in the head

 

[bob58o]

Carburetor Stud!!!

Show us pictures. There are ways to remove a broken bolt.


Otherwise.....
Hemi Head from NR.

Cost $200, includes Head, Rocker Arms, Porting, Bead Blasting, Milling, Oversized SS valves, Valve Springs, Aluminum Retainers, Keepers, Lash-caps, Machined Valve Spring Pockets, 3 angle valve job.

You need to buy pushrods and a valve cover to go with it, unless you have a hemi valve cover.
https://www.nrracing.com/product-p/headhemi.htm

Or I can refer you to one of the guys that do these heads from one of the FB groups.

 

[Jfielding6520]

is this kit for a non hemi or hemi

---------- Post added at 07:37 PM ---------- Previous post was at 07:28 PM ----------

https://onedrive.live.com/prev?v=photos&id=albums&cid=13D702668C696BC3#v=FilePickerView&id=13D702668C696BC3%215503&cid=13D702668C696BC3&ft=15

---------- Post added at 07:43 PM ---------- Previous post was at 07:37 PM ----------

sorry just so many options what if i do this Head, Racing, 212 Predator & 6.5 OHV, 22cc Special
Head, Racing, 212 Predator & 6.5 OHV, 22cc Special
SPECIAL OFFER - LIMITED AVAILBITY

Economy Head for Low Buck Performance Improvement. 4 bolt Valve cover, :
22cc 212 Predator Head, 60727 RTB-03 Casting
Fully Ported and Bead blasted
Milled .050 to increase compression
27mm Intake Valve
25mm Exhaust Valve
Steel retainers (Split Keepers on 5.0mm Valves)
3 angle valve job
22 lb Valve Springs

Recommended for use with Mod 2 or 230 series Cams
(note: Heads may have 5.0mm or 5.5mm Valve stems)
Fits old style predators. Will fit clones if dowel hole is drilled out.
Our Price: $179.99
Sale Price: $119.00
Savings: $60.99