Custom Spedometer and Technometer for Havoc M5

Status
Not open for further replies.

Acavs81

New member
Messages
3
Reaction score
0
Hey guys, im kinda new to engines and gokarts and such so please excuse me if i say something wrong or have no idea what im talking about.


I want to install a spedometer and technometer to measure my speed and the RPMs. Any suggestions on how i should go about this? Im running a Greyhound 6.5hp engine (the stock subaru 5hp engine was replaced before i got the gokart) the standard comet torque converter that came with it.
 

itsid

Moderator
Staff member
Messages
11,563
Reaction score
261
Location
Ruhrpott [Germany]
Any cheap bicycle speedometer will do.

to measure the speed, just punch in the correct circumference (and correct means MEASURED, not calculated) and hook it to a front wheel (since that's closer to the steering wheel ;))

Funny enough; you could also use it as a tachometer (setting circumference to 268mm and measuring mph you'll read rpm (say 30.4 mph would equal 3040 rpm ;))
if you attach the magnet to the Comet driver and grab it's signal.

But frankly, the easiest thing to do would be to buy a cheap hourmeter /tach from ebay (should be ~10 bucks max)

'sid
 

itsid

Moderator
Staff member
Messages
11,563
Reaction score
261
Location
Ruhrpott [Germany]
Should also be an app for the speed on your smart phone.

indeed,
We'll be back after a short break...


get it on your phone for free at app.kartcalc.net
for more info follow this link
​

Now back to our scheduled program :D

:lolgoku:
Sorry couldn't resist!

No honestly, it can read your speed (yes in mph as well if you like) from your GPS, and it also uses the accelerometer to estimate the power involved to get there.

But like all GPS speedometers, it's only as accurate as the signal strength .. a direct wheel reading is much better tbh.

'sid
 
Status
Not open for further replies.
Top