Curtis PMC: STP4119 transistor, Good Number???

[Chrisr]

I have a curtis 1208-2339 curtis speed controller with a blown transistor. The face is blown off, but i can almost make out STP4119. It's next to the 6 pin header with no heatsink. I've seen many pictures of these, but nothing showing a close up. if you have any curtis controller, can you check that number to see if yours has that too?

 

[itsid]

the NTMFS4119N is a 30V 30Amp powerAmp MosFET and should still be available
the STP4119 is discontinued a few millenia ago...
And yes, you read that correctly

An alternative viable solution should be the IRF540 (100V 30A) as well
(found that on a german forum where OP's specifically asking for a "curtis controller STP4119" replacement)

'sid

[EDIT]
Oh look.. radwell still has two STP4119 in the US:
http://www.radwell.de/en-GB/Buy/GENERIC/STP4119?redirect=true
(sorry.. I always get redirected to the german page.. I hope you'll be to the US page as well )

go for it

 

[Chrisr]

Thanks for that confirmation. I hate when the numbers get blown away! You are correct, Radwell is the only place I found as well.

Tschuss,
Chris