crankcase breather filter ??? ex27

Status
Not open for further replies.

umahunter

New member
Messages
10
Reaction score
0
Hi all first post I'm in the process of adding a mikuni carb to my subaru ex27. what I'm trying to figure out is how others installed a lil filter for the breather tube. when I take off the valve cover there looks to be no way to get to the backside where the tube enters the cover . Unless the cover is two pieces that seperate I've searched and haven't found any answer so I figure I'd ask before attempting anything thanks for any help :thumbsup:
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
I just leave the rubber hose stuck in the factory hole in the valve cover and stick a breather on the open end of the hose. Work for me. I dont think there is a way to get past the flapper inside the second chamber of the valve cover if you wanted to secure the filter directly to the valve cover.
 

landuse

Moderator
Staff member
Messages
18,804
Reaction score
613
Location
Pietermaritzburg, South Africa
I just leave the rubber hose stuck in the factory hole in the valve cover and stick a breather on the open end of the hose. Work for me. I dont think there is a way to get past the flapper inside the second chamber of the valve cover if you wanted to secure the filter directly to the valve cover.

What he said..
 
Status
Not open for further replies.
Top