correct fuel mix?

Status
Not open for further replies.

robbie

New member
Messages
857
Reaction score
9
Location
Osceola, Missouri
What's the correct fuel mix ratio for the typical Chinese 49cc pocket bike engine? These things are as common as houseflies, but I've never seen any papers telling what the correct mixture is because all mine have been previously used. I just bought a brand new bike engine on ebay, and it doesn't have any info either!
 

KieranM

Doin It!!
Messages
1,409
Reaction score
3
Location
Kilkenny, Ireland
to brake it in its recommended to be 25:1. brake it in for about 4 tanks, not giving it full revs. Then after 4 tanks move to 32:1 or anything below 50:1. no papers come with these, only when buying the actual bike, but those are shady to say the least lol.
 

robbie

New member
Messages
857
Reaction score
9
Location
Osceola, Missouri
OK, thanks for the advice. I figured that any modern engine was going to be like a new chain saw, rated for 50 to 1. But I just bought a brand new Chinese brush cutter and it has a huge sticker on the gas tank that says 25 to 1, so it made me wonder.......

Now I have 2 gas cans, on for the chain saw and one for the brush cutter. Maybe I'll end up using half a tank from each can for the final mix in the mini bikes!
 

robbie

New member
Messages
857
Reaction score
9
Location
Osceola, Missouri
I bought it from an ebay vendor in Hong Kong. The engine was $39, the shipping was $60. Sometimes you can find these on ebay for around 80 bucks total with shipping, but the price seems to have gone up recently.

Mine came with the aluminum starter housing, which is a big plus. The aluminum starter usually costs $20 by itself.

The most amazing thing was that I received it just 3 days after ordering.
 
Status
Not open for further replies.
Top