Converting Recoil Start to Electric Start

Status
Not open for further replies.

91blaze

New member
Messages
87
Reaction score
1
Location
Indiana
I have a spare recoil starter so I thought it would be possible to use it to convert my 6hp Tecumseh to electric start.:idea2: The idea I have is to cut out parts of the case to run a belt through to a starter motor. I'm not sure if this will work so maybe somebody can give me some suggestions or ideas. I plan on getting a cheap starter from a car in the junkyard. I don't really want to spend much on this so any suggestions are welcome.
My current recoil starter:


Spare to convert to electric:

 

karl

Well-known member
Messages
2,449
Reaction score
719
Location
North east Ohio
Again, ITS NOT WORTH IT!!!!!!!!!!!!!!!!!!!!!!! Whats this fascination of electric start when it takes 2 seconds and little effort to pull! It will take way more effort to make it that pulling it, and it would be Jerry rigged and pointless. Sorry for the reality check.
 

B.M.800

TheBeal.
Messages
2,387
Reaction score
26
Location
Central PA
Again, ITS NOT WORTH IT!!!!!!!!!!!!!!!!!!!!!!! Whats this fascination of electric start when it takes 2 seconds and little effort to pull! It will take way more effort to make it that pulling it, and it would be Jerry rigged and pointless. Sorry for the reality check.

The possibility of someone not being able to start it... Or, because its nice to have... A convenience.

However I think it would be better off buying a E-start engine, not necessarily brand new, I would think they could be found pretty easily...
 

bighead

New member
Messages
4,022
Reaction score
54
Location
Pacific Northwest USA
Again, ITS NOT WORTH IT!!!!!!!!!!!!!!!!!!!!!!! Whats this fascination of electric start when it takes 2 seconds and little effort to pull! It will take way more effort to make it that pulling it, and it would be Jerry rigged and pointless. Sorry for the reality check.

I spent big money on ES for my Ody. And more big money for the CDI conversion.

convenience my friend.
 

klicky96

New member
Messages
558
Reaction score
1
Location
Sandusky, Ohio
Electric Starters are just getting more expensive. A new one for my engine is $170. I only paid $160 for the dang engine. I found out, the best way is to put a pulley on the shaft, and run a belt to a starter mounted on your frame. I did this a couple weeks ago, works like a charm. and you'd still have your pull starter if something happened to the starter.
 

HellSpawn

New member
Messages
476
Reaction score
2
Location
Wadena, Minnesota
personally, I'd run a starter/generator if I was going to attempt something like this. Thataway you'd have the ability to run lights and other things.
 

91blaze

New member
Messages
87
Reaction score
1
Location
Indiana
The possibility of someone not being able to start it... Or, because its nice to have... A convenience.

However I think it would be better off buying a E-start engine, not necessarily brand new, I would think they could be found pretty easily...

^This is exactly why I want the electric start. But I'm not going to buy an engine though.

How about a bike starter? Not as big and bulky.

I mentioned car starter cause I can get one really cheap at the junkyard. If I can find something cheap I might go with this.

Electric Starters are just getting more expensive. A new one for my engine is $170. I only paid $160 for the dang engine. I found out, the best way is to put a pulley on the shaft, and run a belt to a starter mounted on your frame. I did this a couple weeks ago, works like a charm. and you'd still have your pull starter if something happened to the starter.

Thank you for the idea, I might end up doing this instead.

personally, I'd run a starter/generator if I was going to attempt something like this. Thataway you'd have the ability to run lights and other things.

I would do this but I'm afraid the generator would take too much horsepower away from the engine. I might try to find something smaller that I can use. I was planning on just recharging the battery after each run.
 

gvfc2

wishing i was living
Messages
943
Reaction score
4
Location
Tacoma,wa
you could use like pm motor right? that would double as a generator and you could find one that wont rob you of the much hp. they are used in wind turbines after all
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
brendonv101 started to convert one of his engines to electric start using a car starter motor. he did what was mentioned using a pulley. and then just welded another pulley to the starter gear on the motor and hooked it up. I make it sound simple but its a lot more complicated, unless you know what your doing so... draw up some plans and measure twice so you only gotta cut once ;)

heres his vid... hoope this helps
http://www.youtube.com/watch?v=n_mQjlUwYmI&feature=channel_video_title
http://www.youtube.com/watch?v=jNG9XdujMrg&feature=relmfu
 
Status
Not open for further replies.
Top