Comet Torque Converter Missing Spacer

[Bymp]

Hello all,

I'm missing the spacer to my comet torque converter that goes between the engine and the drive pully. I know it will be 3/4 to match the shaft but can someone measure theirs for me? I need the length of the spacer. I'm going to make one to get a replacement.

Thanks all,

J

 

[Bymp]

Anyone?

Please help >.<

 

[KartFab]

just line up the sheaves on the driven and drive unit with a straight edge, then measure the space you have. If you cant cut spacers, just buy washers at a hardware store.

 

[jamyers]

Seems like most folks use a 3/4 X 3/4 spacer, as did I.