comet 40 driven

Status
Not open for further replies.

atvrandy

New member
Messages
6
Reaction score
0
hello looking for a comet 40 driven spring number- yellow spring to
make the helix on the driven clutch spin opposite direction thanks
for any help atvrandy
 

atvrandy

New member
Messages
6
Reaction score
0
i have to take driven clutch put in front of motor and flip 180 degrees almost working .
comet 40 series has a double helix will work either direction so i am looking for a spring and i have a red one was told it is a yellow spring or a part number would be great thanks randy
 

freakboy

the names 'mater
Messages
3,961
Reaction score
2
Location
hick town
oh ok you should just be able to move the cam type deal to the other side without replacing the spring.
 

atvrandy

New member
Messages
6
Reaction score
0
i thought same thing but have looked at clutch and will need left hand wound spring
was told comet did make it so looking for part # to help me find one thanks randy
 

atvrandy

New member
Messages
6
Reaction score
0
found part 204524a yellow spring -took long enough but it is on its thanks guys for help
 

Zilrea

New member
Messages
6
Reaction score
0
Yellow Reverse Wind Spring

atvrandy,

Did you happen to find any place to purchase one of these reverse-wind yellow springs?

Thanks.
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
Do you really need this? I have my 30 series mounted with the driven forward of the driver and it is flawless.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Yeah- I can't figure out for the life of me why you'd need to revese it- Mine's out in frot of both the engine and axle- the rotation remains the same... I'm stumped- Unless he's get a reverse-rotation engine...
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
Would that even make a difference? We've both got CCW engines with forward facing TCs and it makes no difference. Why would it matter if his was forward facing with a CW engine?
 

Zilrea

New member
Messages
6
Reaction score
0
The difference lies is the symmetry of the 30 series vs 40 series. The 30 series is asymmetric (both the driver and driven components face outboard) vs the symmetric 40 series when the driven unit is flipped around. In order to rotate the driven unit from inboard to outboard facing you need a reverse wind spring.

Picture detailing symmetric vs asymmetric: http://www.gokartsupply.com/identify.htm
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
The only symmetry involved is with the cuts of the belts and the faces of the driver and driven. My TC driven is closer to the front of my kart than the driver. My backplate would only fit around the motor forward or vertical and vertical wouldn't work so I went forward and it has preformed perfectly. I don't think there's any need for a new spring. I think that the yellow spring is stronger and causes it to "upshift" later.
 

Zilrea

New member
Messages
6
Reaction score
0
Redsox,
I don't have a backplate as the 40 Series does not come with a backplate. The Yellow Spring for the 40 Series indicates a reverse-wind spring whereas the Yellow Spring for the 30 Series offers more torque-taking longer to upshift as you suggested. There's a difference between the 30 and 40 Series in these parts.
Also, I'm not trying to move the TC driven toward the front of the cart. I'm trying to flip it backwards on the same jackshaft.

Toystory,
I need to flip it around because I don't have the room for the driven components to face inboard as that's where my sprocket needs to be. I designed everything pretty compact and ran into the hiccup of my TC driven spooling the wrong way.

Next time I'm home I can take some pictures.
 
Status
Not open for further replies.
Top