comet 30 tav 1 help please.

Status
Not open for further replies.

outcrydrummer

KART ART
Messages
364
Reaction score
0
Location
Greensboro, NC
I'm having a problem with the driven clutch. I'm trying to move the spring in it and I can't get it apart to do it.

It's in position 1 right now and its coming in way to early. I'm trying to move it to position 2 or 3 if possible.

I have already removed the clutch and both snap rings but can not get it apart from there.

Help please
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
you need to take the nut off the jackshaft, take the driven off, and remove the clip holding the cam.

then the tension plus a little wiggling will pop off the cam and you can move the spring to a different hole
 

outcrydrummer

KART ART
Messages
364
Reaction score
0
Location
Greensboro, NC
Um......yeah I already removed the clutch and the snap rings...which are the clips your referring to and tried everything to seperate it but won't budge.
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
Can you post photos? Once you remove it from the jackshaft and it's just the two faces held on by the cam and that snap ring, removing that ring should make it pop apart from the spring inside it.

Removing 12 and 14 should make it pop.
 
Status
Not open for further replies.
Top