Comet 30 belts ?

[BirdFanatic]

Ok so i just bought a full driver on ebay it is not a true comet but was told it will work with the comet pully (Big driver clutch ) what belt should i get is every belt the same size for the comet 30 ?

 

[OzFab]

Umm, no; there are different types of series 30s so, we need to know what type you have before we can advise you on what belt you need; for that we need pics & measurements...

The simplest way is the measure from the centre of the driver to the centre of the driven, then there is a look-up chart here somewhere (hopefully, someone will post a link soon) to guide you to the correct belt

 

[BirdFanatic]

7 inchs across from center to center
What i had and what i bought http://www.ebay.com/itm/331019772008?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT

 

[Axx3d]

Driver looks solid and clean..

Rung what you brung kid..

 

[BirdFanatic]

Im just wondering what belt type i need (specifically the part number)

 

[2SlickNick]

https://www.gokartsupply.com/beltchart.htm

 

[nick956]

Mine came with the belt and used it with no problems

 

[BirdFanatic]

Traded the yerf dog 3202 for this Briggs and stratton animal on a Emmick Falcon came with two cylinder blocks a ton of extra parts including a burris gear reduction starter

 

[rocketkart]

Do u keep anything for more than a week? trading **** all the time.

 

[coreyr6624]

I'll assume you know your driver pulley setup is backwards. stationary plate needs to be inside.

 

[BirdFanatic]

I'll assume you know your driver pulley setup is backwards. stationary plate needs to be inside.

Yes i bought a new one was missing a few parts
Rocket if i get a chance to trade it for something better i trade it .There was a show on tv where they start from something small and trade for something big .