Clutch question?

Status
Not open for further replies.

rgvkid

Charlie Don't Surf!
Messages
267
Reaction score
1
Location
Los Angeles, Anaheim
I think its a comet, there are no labels on it. It was on a used engine i bought and i used it on my HF2.5 build. It worked great for Hours and hours. I had to make a sleeve for it to fit the 5/8 shaft.

After days of riding i started it up and noticed a knock in the clutch area. When i pulled apart the chain guard a small spring fell out, seen in pic Clutch 6. Not sure what its from. Does it look familiar? Maybe from the engine, probably from a pen justed picked up from riding in the parking lot.

Anyways, I pulled out the clutch and took it apart to check. I noticed that because of the sleeve spacer it was only pushing against a small amount of the built in keyway so it was starting to bite off some of it causing the play and the knock sound. Can i replace this center part? or shave it down and have a machine shop cut a slot to add a key? Maybe not worth it.
How do the pads look? this is my first time taking apart a clutch and it seemed to work great when we road it.

Any advice would be greatly appreciated.

How would they cut a slot with in the cylinder, is that even possible?
 

Attachments

  • Clutch1.JPG
    Clutch1.JPG
    51.2 KB · Views: 3
  • Clutch 2.JPG
    Clutch 2.JPG
    36.4 KB · Views: 9
  • Clutch3.JPG
    Clutch3.JPG
    55.8 KB · Views: 4
  • Clutch4.JPG
    Clutch4.JPG
    75.7 KB · Views: 3
  • Clutch5.JPG
    Clutch5.JPG
    93.1 KB · Views: 4
  • Clutch6.JPG
    Clutch6.JPG
    52 KB · Views: 5

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
I dont think that tiny spring came from your clutch.

That key does look pretty dam hammered. I'm guessing its not doing the keyway in your pto any favors...

If you got a buddy in a machine shop that'll work for free you might as well have him see what he can do. But if you'll be paying $100 an hour I'd just buy the correct clutch for that engine.

PS: looks like your clutch wears the shoes all funky, I'm thinking if you could reverse those shoes you'd be crusin on brand new lining...
 

rgvkid

Charlie Don't Surf!
Messages
267
Reaction score
1
Location
Los Angeles, Anaheim
K Thanks Ander. Wasn't sure how those pads were suppose to wear. or if that was normal. Guess i'll be looking into a new clutch
 
Status
Not open for further replies.
Top