clone with lights no charge coil

Status
Not open for further replies.

DustinWolfe

New member
Messages
204
Reaction score
0
Location
Meridian, Idaho
just curious if someone knows more about this. I have a clone motor i pulled off some other bike running my pocketbike and it has no charging coil on it. BUT. the bike it came off had a headlight. Im wondering if maybe the coil has that capability or if the chinaman minibike mfrs just threw it on with no thought as to if it would even work or not. i never had it running on that bike as the valve lash was way off and i took it apart to mod it for the pocketbike anyway. i can get you pictures if you want although i really dont see that being helpful(other than MAYBE the coil). its a standard clone and theres definetly only 1 coil so if anyone knows whether some coils can hang or if its not really workable.
 

slideways

New member
Messages
575
Reaction score
6
The charging coil is located under the flywheel and has a wire coming from it sticking through the tinwork. If this isnt there.. you have no charging system. You'll have to add one which can be tough to find a used one or just use a small mower battery or something to run the light.. and then recharge it.
 

DustinWolfe

New member
Messages
204
Reaction score
0
Location
Meridian, Idaho
It probably just had battery or a bottle dynamo.

Thanks

Hayden

negative. it had nothing but the engine. no battery and no generator other than the coil and it ran a headlight. i know what it had everything is still in my shop. this is what it had and this is what it did. no room for speculation.
 

DustinWolfe

New member
Messages
204
Reaction score
0
Location
Meridian, Idaho
no its the original. nad as far as tracing the wiring it just went to the wire that traditionally would be your kill switch. personally i would think that running a headlight through the killswitch wire would kill the engine but thats how it was wired. and also i feel the need to add that this wasnt a home made minibike. actually it wasnt much of a minibike really more like a midibike lol.
 

DustinWolfe

New member
Messages
204
Reaction score
0
Location
Meridian, Idaho
hmm no but definetly incandescent, no markings on it but heres a few pictures. the bulb is just below the penny in the first pic and the other is the cradle for it. theres no markings on either
 

Attachments

  • S5035208.jpg
    S5035208.jpg
    70.6 KB · Views: 7
  • S5035210.jpg
    S5035210.jpg
    68.4 KB · Views: 6

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Very interesting. I suppose it's possible, but certainly not common. You wouldn't want to take too much from the mag, for fear of robbing the spark.
 

DustinWolfe

New member
Messages
204
Reaction score
0
Location
Meridian, Idaho
you see that is what i thought. again i never saw it work and honestly ill probably never run the pocket bike in the dark anyways because its really small and is fast enough that you need to see where your going clearly. i just figured maybe if it powered a headlight then it could possibly power something else, but i think ill just leave well enough alone. thanks though for the input.
 

DustinWolfe

New member
Messages
204
Reaction score
0
Location
Meridian, Idaho
well thats the thing. im not planning on running a light. i just read on here somewheres that you need a charging coil under the flywheel which i do not have yet it still ran lights so i figured maybe it was like an aio coil or something.
 

DustinWolfe

New member
Messages
204
Reaction score
0
Location
Meridian, Idaho
lol no its just a coil same size as any other but i can get some pics for ya but it'll have to wait till tomorrow as i am working on my golf cart right now and it isnt here. and it definetly has strong spark. no doubt about that
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
yeah thats funny though because magnetos make real high voltage at low amps so id think itd blow a bulb... i would think LED's would only work but that bulb you got's not i can see the coil. hmmmm.... have you run it with the light at all?
 

DustinWolfe

New member
Messages
204
Reaction score
0
Location
Meridian, Idaho
nope when it was on that bike it didnt run. the valve lash was set way off. heres some pics the green bike is the original and the black is what its on now
 

Attachments

  • S5035212.jpg
    S5035212.jpg
    121.6 KB · Views: 6
  • S5035108.jpg
    S5035108.jpg
    100.3 KB · Views: 7
  • S5035214.jpg
    S5035214.jpg
    124.1 KB · Views: 5

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
if possible i would try to find out how much power that mag is putting out, then try and see what the spark plug needs, then see if/how much you got left over, like blue said, mags are usually high volt, so some type of inverter/converter would prob be needed. also this may seam stupid, but do these things give out ac current, or dc, or ac that is then converted to dc?

p.s. i wan't that green bike!!!!!
 
Status
Not open for further replies.
Top