John Roger
Active member
hey I am in the prosses of buying one of these and i saw someone put it on a go kart i might do it to mine any info on these specs power ex
Last edited:
Chrysler 525cc 4 cylinder military generator/engine
- Thread starter John Roger
- Start date
Denny
Canned Monster
It’s more useful and valuable as a generator. Awfully heavy for a gokart.
John Roger
Active member
not really from specs online the engine weighs 122 pound a predator 670 weighs about 120 and yes it is heavier but it is a 20-25 hp from what i have read
Last edited:
Denny
Canned Monster
Predator 670 only weighs about 90 lbs. it has an aluminum block. That hunk of beef on that generator has a cast iron block.
John Roger
Active member
Not accoring to hf
wet wight*
wet wight*
Last edited:
Whitetrashrocker
Inmate #952016
How is that monster fed. What's the intake? Fuel injected?
That could be an interesting build if done right. Not sure if the power to weight would be enough. It's made to just idle all day. And I bet parts could be hard to find.
I saw a few C&C episodes. Liked their shifter/ suspention cart. Then noticed the sponsorship and decline. But I've noticed that with alot of channels I've grown to like.
That could be an interesting build if done right. Not sure if the power to weight would be enough. It's made to just idle all day. And I bet parts could be hard to find.
I saw a few C&C episodes. Liked their shifter/ suspention cart. Then noticed the sponsorship and decline. But I've noticed that with alot of channels I've grown to like.
Master Hack
Well-known member
Is that a diesel?
Whitetrashrocker
Inmate #952016
Mep016.
Several military versions.
Rated 8hp at 1600 rpm.
Would be cool on a military based built.
Mini tracked tank or jeep.
Several military versions.
Rated 8hp at 1600 rpm.
Would be cool on a military based built.
Mini tracked tank or jeep.
John Roger
Active member
From what i read its a boxer 4 with a single carb idk the mm size its rated at 6hp because it is super ristrictive with dual 22mm carb it will have 20-28hp and loads of tourqe
John Roger
Active member
Gas not diesel
Kartorbust
Inmate #627
The HP rating is for high elevation, think like 6,000 or more feet. But yeah, better intake and carburetor it wakes right up. It's like an upside down VW 1200-1600 engine as the push rods are on top and not the bottom.
Whitetrashrocker
Inmate #952016
Like the difference between a continental and a lycoming.
John Roger
Active member
Also like denny said i am not runing the generator part i plan on restoring it in the future but just for the lols
Darren
Active member
CARS AND CAMERAS
I Follow their youtube channel
I Follow their youtube channel
John Roger
Active member
dose anyone have experience with these engines
karl
Well-known member
If those guys at C&C can do it, I think you'll be able to do it better
Kartorbust
Inmate #627
Never used one or even been around one. Been wanting to buy one, but since CarsandCameras got them, like the Honda CT70s, they'll shoot up in price or at least it happens to appear that way.
John Roger
Active member
There is one an hour away from my house that I am talking to they guy it dose not run I am getting it soon but for know for privacy reasons this is the vin and date of manufacture
from the vin thingy it was made in the 10 month October and in 1972
from the vin thingy it was made in the 10 month October and in 1972
65ShelbyClone
Active member
It doesn't have a vehicle identification number because it's not a vehicle. The serial number isn't traceable (or not easily traceable) to anyone that bought it as surplus.
I saw the first C&C video about it and was intrigued, so I did some more research. The engine design is very, very industrial and doesn't have a lot of performance potential. The cylinder head design is similar to a 1950s Buick nailhead V8. Personally, I think they sound worse than a Volkswagen flat-four and are even less desirable.
I saw the first C&C video about it and was intrigued, so I did some more research. The engine design is very, very industrial and doesn't have a lot of performance potential. The cylinder head design is similar to a 1950s Buick nailhead V8. Personally, I think they sound worse than a Volkswagen flat-four and are even less desirable.
Denny
Canned Monster
Join Steel Soldiers for help and manuals on how to work on them.