cheap ways to mod 6.5hf engine.

Status
Not open for further replies.

vladkov77

New member
Messages
55
Reaction score
0
Location
spanaway,wa
what are the cheapest way to mod my 6.5 hf engine? nothing serious but like mods that everyone should have. also i cant spend over 50 right now. btw are there any things i can mod without buying anything??? thanks
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
1: Remove governor
2: k & n or uni air filter (and a cheap breather, for a few quid)
3: drill main jet
4: custom straight pipe
Then for over $50 (more like $80 in total maybe if you make your own exhaust.)
5: billet rod
6: 18lb valve springs

i wouldnt upgrade springs before rod, just incase you blow that rod :)
 

vladkov77

New member
Messages
55
Reaction score
0
Location
spanaway,wa
1: Remove governor
2: k & n or uni air filter (and a cheap breather, for a few quid)
3: drill main jet
4: custom straight pipe
Then for over $50 (more like $80 in total maybe if you make your own exhaust.)
5: billet rod
6: 18lb valve springs

i wouldnt upgrade springs before rod, just incase you blow that rod :)

thanks but how do i drill the main jet
 

slideways

New member
Messages
575
Reaction score
6
Go to ebay and search "number drill set" you need a set that covers .036 or #90. You take the jet out and slowly carefully hand drill the hole to to correct size. You can't do it with a power drill or a regular set of drill bits.

You can also buy jets already sized.. but having the number drills is just nice so you can do it in the future to others as well.
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
Probably too sloppy when the slightest enlargement can make it run too rich.
 
Status
Not open for further replies.
Top