carter talon with predator 212 stage 2 kit

FlkYurBEen

New member
Messages
6
Reaction score
1
A while ago I bought a carter talon for $45. it was in a pretty bad shape but for $45 bucks I couldn't pass it up. It had the stock GY6 engine but did not start. I ripped it out and put a Predator 212cc engine from Harbor Freight. ill be posting up more pictures of it from time to time
 

Attachments

  • 20181007_092657.jpg
    20181007_092657.jpg
    1.9 MB · Views: 9
  • 20201012_092334.jpg
    20201012_092334.jpg
    1.3 MB · Views: 8
  • 20201005_180228.jpg
    20201005_180228.jpg
    1.5 MB · Views: 10
  • 20181007_092635.jpg
    20181007_092635.jpg
    1.6 MB · Views: 10
  • 20181007_092641.jpg
    20181007_092641.jpg
    2.1 MB · Views: 8

FlkYurBEen

New member
Messages
6
Reaction score
1
mods on engine is your standard governor removal. did the billet flywheel, billet side cover , billet rod with 24mm Mikuni carburetor with 265 hot cam, i have the manifold wrapped
 

Attachments

  • IMG_1244.jpg
    IMG_1244.jpg
    2.3 MB · Views: 15
  • IMG_1243.jpg
    IMG_1243.jpg
    2.4 MB · Views: 15
  • IMG_1242.jpg
    IMG_1242.jpg
    2.4 MB · Views: 15

FlkYurBEen

New member
Messages
6
Reaction score
1
That's not a bad idea. if I blow this one I think I might just do that. At the time when I started this I had no idea what I was doing. I just added a harbor freight 22" LED bar i plan on adding the pods at the bottom as well in the future
 

Attachments

  • IMG_1256.jpg
    IMG_1256.jpg
    2.3 MB · Views: 7

FlkYurBEen

New member
Messages
6
Reaction score
1
DO you guys think I can fit some RZR seats in this. Or would you guys have any other suggestions for seats.
 
Top