Carter Brother Super Wheels Go Kart.In Need Of Rims And Tires !!

[123SlowKart]

I Need Some Wheels And Tires For A Carter Brothers Super Wheels Go Kart Project Because The Wheels Are Bent Up..I Am On A Budget So If Anybody Has Any Wheels For Sale Or Kno Where To Get Cheap Ones Respond Below

 

[Karttekk]

Try here:

https://www.carterbrothersparts.com/

 

[gmo1515]

Unfortunately Carter used their own 4 bolt pattern which was on a 3-3/32" bolt circle which no other manufacturer used. I had some on mine that were rusted beyond repair. I ran across some 2 piece steel rims with flat centers that I re-drilled to the Carter bolt circle pattern (about 45-deg off from the original holes using the original wheels as a pattern.

-Jason

 

[123SlowKart]

Ahh Thanks

 

[gmo1515]

Your floor decal

Looks like to me that your decal on the floorboard may be in decent shape. Can you take a good photo of it as straight on as possible? I'm looking into having it reproduced for mine.

Thanks,
Jason

 

[123SlowKart]

Looks like to me that your decal on the floorboard may be in decent shape. Can you take a good photo of it as straight on as possible? I'm looking into having it reproduced for mine.

Thanks,
Jason

I Won’t Be Back At The Location Of The Kart For A Couple Days .If You Can Wait I Got You For Sure

 

[123SlowKart]

Carter Super Wheels

I Just Picked Up A Carter Super Wheels Kart Project To Work On ..Its In Rough Shape From Sittin Up For Some Years .I Finally Got It Running But I Wont Stay Running Without Hittn Throttle ..Wheels Are Bent But I Hear It’s Hard To Find Wheels That Will Fit It .What Can I Do About That?

 

[gmo1515]

It can wait. I'm not in a huge hurry. Also if you can get some key dimensions too. I've found a few pics here and htere of decals still in halfway decent shape but one guy said he really needs the dimensions. I figure the more info and pics the better. Thanks!

 

[123SlowKart]

Wheels

What Can I Do About Wheels For A Carter Brothers Super Wheels Go Kart..I Need All 4 But I Hear Bolt Patterns Aren’t Made Anywhere Else ..Need Help

 

[landuse]

What Can I Do About Wheels For A Carter Brothers Super Wheels Go Kart..I Need All 4 But I Hear Bolt Patterns Aren’t Made Anywhere Else ..Need Help

I have merged all your threads. It is better if you ask all your questions regarding your kart in one thread. Then people know what you are working on and they don't have to jump around the forum to follow you

 

[123SlowKart]

Unfortunately Carter used their own 4 bolt pattern which was on a 3-3/32" bolt circle which no other manufacturer used. I had some on mine that were rusted beyond repair. I ran across some 2 piece steel rims with flat centers that I re-drilled to the Carter bolt circle pattern (about 45-deg off from the original holes using the original wheels as a pattern.

-Jason

Could You Send Me A Link To The Wheels You Bought And Send A Pic Of Yours Please ?Thanks

 

[gmo1515]

Actually by pure dumb luck I ran across a guy who salvaged them off a wrecked cart. Said that he gave the engine to a friend and saved the wheels thinking someone might want them someday. Turned out that person was me. He just gave them to me. He didn’t want any money for them.

 

[123SlowKart]

Actually by pure dumb luck I ran across a guy who salvaged them off a wrecked cart. Said that he gave the engine to a friend and saved the wheels thinking someone might want them someday. Turned out that person was me. He just gave them to me. He didn’t want any money for them.

Nd How Did You Go About Drilling The Holes In The Wheels .I Haven’t Had To Do Something Like That Before..How Did You Get The Right CutOuts

 

[gmo1515]

The center hole in the old a new wheels were the same size. I laid the old one on the new and traced the hole location onto the new wheel. After that I marked the center with a punch and drilled the new holes with a drill press. You could also take the wheels to a machine shop and they could probably do it if you don’t have the tools or feel comfortable doing it. Because Carter used an uncommon bolt circle there are no new off the shelf wheels that will bolt right on.

 

[123SlowKart]

It can wait. I'm not in a huge hurry. Also if you can get some key dimensions too. I've found a few pics here and htere of decals still in halfway decent shape but one guy said he really needs the dimensions. I figure the more info and pics the better. Thanks!

Here’s The Pic You Need ..This Is Before I Start My Restoration

 

[gmo1515]

That has to be one of the best condition decals that I’ve found to date. I certainly hope that you decide to preserve it or have it reproduced in some way. If you did I suspect myself and a few other Carter owners would spring for one. Can you get some dimensions?

Jason

 

[123SlowKart]

That has to be one of the best condition decals that I’ve found to date. I certainly hope that you decide to preserve it or have it reproduced in some way. If you did I suspect myself and a few other Carter owners would spring for one. Can you get some dimensions?

Jason

Lol I Wanna Paint The Kart.But I Don’t Wanna Lose The Decal ..Nd I’ll Try To Get Some Dimensions When I Go Back To Mess With It ..I’m Kind Of New To The Whole Thing

 

[jonboy]

If you want to preserve the decal Id suggest getting some liquid mask from a model car paint supply or hobby shop. Hobby Lobby may even carry it

 

[gmo1515]

SlowKart,
I'm reaching out to a sign shop here in the Birmingham AL area who I believe can reproduce it. If you don't mind, I'll borrow your photo and post it on the forum to see who else might be interested. Perhaps there are other owners who would want some as well.

Jason

 

[123SlowKart]

SlowKart,
I'm reaching out to a sign shop here in the Birmingham AL area who I believe can reproduce it. If you don't mind, I'll borrow your photo and post it on the forum to see who else might be interested. Perhaps there are other owners who would want some as well.

Jason

That’s Fine