Carb Questions

[anguspackman]

I would like to know what each circle component is, thanks in advance and ask any questions if you need the information.

 

[MTNSleder]

How did I do Master...

 

[anguspackman]

Is my choke broken, the circle on the top is the choke?

---------- Post added at 10:22 PM ---------- Previous post was at 10:19 PM ----------

What is this part then because i thought it was the choke

 

[MTNSleder]

Apon further inspection it appears to be broken... Hard to tell with pictures though...

 

[MTNSleder]

Just so were on the Same page. This is what were talking about??? That there turns the choke and it dose apear to be broken...

 

[MTNSleder]

Your engine will still run.... Getting it started could be a challenge IDK.....

 

[anguspackman]

Yeah that part, what is the thing in line with it at the top?

 

[MTNSleder]

You need a replacement or something? I don't know of any..

Wait for a forum Professional maybe they'll Know, im just a Canadian who knows nutin

 

[anguspackman]

Could someone help me find a new carb. The main circle is 30mm wide and the bolt holes are 45mm from the middle of each.

 

[MTNSleder]

What engine did this come off???

Here's some carburetors look for one that matches your engine..

http://www.gopowersports.com/go-kart-parts/go-kart-carburetor/

 

[anguspackman]

Im not sure, the engine is unbranded but maybe a honda

 

[mckutzy]

Pics of the engine???

 

[anguspackman]

I think i have found a suitable carb now so i should be fine, thanks for the help

 

[mckutzy]

Still don't leave us hanging... Show us what the motor is?...

 

[anguspackman]

---------- Post added at 08:37 PM ---------- Previous post was at 08:36 PM ----------

 

[MTNSleder]

Looks like a B&S flat head engine or something similar...

 

[anguspackman]

Thanks for the info

 

[mckutzy]

I think it's an older tec... Angled plug and The carb are reminiscent of such...

 

[KartFab]

could be a tecumseh engine, one thing is fore sure is that it is an L-head (flathead) and there is something stamped on the block which could be a model number.

 

[OzFab]

Could also be an old Honda G series...