Carb Question

Status
Not open for further replies.

qtband

Well-known member
Messages
1,772
Reaction score
72
Location
St. Louis, MO
The old carb didn't have this adjusting screw. Is it for idle or high speed?
 

Attachments

  • 1A20170107_130801.jpg
    1A20170107_130801.jpg
    31.5 KB · Views: 5

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
The black one just above and to the right looks like the typical Idle adj. screw.
So maybe that is high speed or something.
 

OzFab

Well-known member
Messages
15,615
Reaction score
76
Location
Warwick Qld, Australia
That's the idle mixture screw; in most cases, they are set on the engine & capped; with a replacement carb, obviously, it needs to be tuned to the engine...
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Idle Mixture Fuel Screw.

Turn it to the right (clockwise) to make the Idle mix get less fuel (more lean).
Turn it to the left (counter-clockwise) to make the Idle mix get more fuel (more rich).

A Good Starting Point is two turns out.
That means slowly and carefully turn the screw all the way in until it gently seats... and then turn the screw two complete revolutions out (or counter clockwise).

Adjust from there if necessary.

I really like how awkward this guy seems on camera, and it is a really good video.
https://www.youtube.com/watch?v=YxpQjDQzX7g
 
Status
Not open for further replies.
Top