Carb help!!!

Status
Not open for further replies.

Rotore

Teh SPIK
Messages
1,663
Reaction score
1
Location
Caguas, Puerto Rico
i have my briggs carb. that i left on the floor where i was working to go get the phone and my 2 dogs peed on y carb. :censored: and i have this spare carb from a smaller tec. bore size on the briggs was 1 1/8 by 1 /13 and the bore of the tec carb is about 1mm off 7/8.

Could i use it on my briggs?

here are some pics of the carb:
 

Attachments

  • HPNX0250.JPG
    HPNX0250.JPG
    98.7 KB · Views: 2
  • HPNX0249.JPG
    HPNX0249.JPG
    88.9 KB · Views: 1
  • HPNX0236.JPG
    HPNX0236.JPG
    117.7 KB · Views: 0
  • HPNX0235.JPG
    HPNX0235.JPG
    118 KB · Views: 1

Kenny_McCormic

Kartless....
Messages
4,537
Reaction score
11
Location
Michigan Troll
When a dog doesn't respond to traditional bad dog type stuff, I recommended kicking its ***. The dog has to understand that you run this place, NO EXCEPTIONS, it should whine in fear when you stare it down. You have to think like the dog, pack mentality.
 

~JM~

New member
Messages
8
Reaction score
0
When a dog doesn't respond to traditional bad dog type stuff, I recommended kicking its ***. The dog has to understand that you run this place, NO EXCEPTIONS, it should whine in fear when you stare it down. You have to think like the dog, pack mentality.

People like you don't deserve to be allowed to have a Pet. :censored: loser!
 

freakboy

the names 'mater
Messages
3,961
Reaction score
2
Location
hick town
People like you don't deserve to be allowed to have a Pet. :censored: loser!

But some people Like YOU need to lighten up and not take **** so seriously. Im 100% sure he doesnt kick the **** out of his dog. Hes probaly talkin about a wack on the *** with a rolled up newpaper or something like that.
 

Kenny_McCormic

Kartless....
Messages
4,537
Reaction score
11
Location
Michigan Troll
But some people Like YOU need to lighten up and not take **** so seriously. Im 100% sure he doesnt kick the **** out of his dog. Hes probaly talkin about a wack on the *** with a rolled up newpaper or something like that.

Pretty much yea. I'm not saying to beat it with an inch of its life but there is nothing wrong with hitting a dog to make it behave properly, and if done right you wont do it very often if at all.
 

pezgoon

New member
Messages
35
Reaction score
0
i agree with kenny, its like a child, when it doesnt lsiten, give it a smack, but dont start goin at the thing with a bat or somethin... and if you show the dog whos leader when its new, you wont have to do it very long
 

brendonv

New member
Messages
861
Reaction score
3
Location
Australia, Perth
A bit of dog piss wont hurt the carby man, just take the bowl off and soak it in petrol. No need for carb cleaner, petrol does the same job. Soak the hole carb in petrol in a big tin, give it a bit of a shake every 2 mins or so then take all the parts out after about 30mins or watever, wipe em off, give em a blow with some air if need be and re assemble. Easy as!

NOTE: Dont put the gaskets in the fuel. They sometimes sorta melt.
 

Kenny_McCormic

Kartless....
Messages
4,537
Reaction score
11
Location
Michigan Troll
i agree with kenny, its like a child, when it doesnt lsiten, give it a smack, but dont start goin at the thing with a bat or somethin... and if you show the dog whos leader when its new, you wont have to do it very long

Exactly, if from day 1 you only feed it after you eat, you go through doors first, etc. it will get the idea. But a good smack or will put it in its place if it doesn't get it.
 
Status
Not open for further replies.
Top