Carb and Tank

Status
Not open for further replies.

late96

New member
Messages
5
Reaction score
0
Trying to help a young guy out with a cart he purchased> Has a briggs model 135202. Need carb and gas tank. Also has a Comet clutch that some one has bent trying to remove, so if someone could help us out it would be appreciated?? Thanks
 

late96

New member
Messages
5
Reaction score
0
By what I have found in research, the clutch is a 30 series. If I were to go with one of those engines in another thread from Harbor freight, how would we run throttle to them? Thanks
 

landuse

Moderator
Staff member
Messages
18,804
Reaction score
613
Location
Pietermaritzburg, South Africa
By what I have found in research, the clutch is a 30 series. If I were to go with one of those engines in another thread from Harbor freight, how would we run throttle to them? Thanks

Make sure the other engine has the same shaft diameter as your clutch. If it is less that 9HP, and has the same shaft diameter, then it will be fine
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
The predator has a relatively kart friendly throttle setup. You will see if you get one. IIRC there is a clamp for the outer sheath on the engine and a clamp for the cable on the throttle arm.
Just make sure you install a return spring and loosen the 10mm nut on the throttle arm.
 
Status
Not open for further replies.
Top