Can someone please help ID this kart frame

Status
Not open for further replies.

josh7owens

New member
Messages
63
Reaction score
0
I just picked this up can someone please help ID it?
 

Attachments

  • 84EEFF19-A0FF-499F-89A3-4228CDF976BA.jpg
    84EEFF19-A0FF-499F-89A3-4228CDF976BA.jpg
    601.7 KB · Views: 5
  • 5B4C6C2E-AD57-49DC-8067-6258B6F792E4.jpg
    5B4C6C2E-AD57-49DC-8067-6258B6F792E4.jpg
    296.4 KB · Views: 3
  • 8F950207-42DC-4BA8-96E7-6ECC5456850A.jpg
    8F950207-42DC-4BA8-96E7-6ECC5456850A.jpg
    424.9 KB · Views: 3
  • 6E3A3C19-05C1-4B89-B5F5-FB47CDC9FA79.jpg
    6E3A3C19-05C1-4B89-B5F5-FB47CDC9FA79.jpg
    635.3 KB · Views: 4
  • 7D26B411-9632-4027-8E40-DB42FFCF2958.jpg
    7D26B411-9632-4027-8E40-DB42FFCF2958.jpg
    312.2 KB · Views: 5

itsid

Moderator
Staff member
Messages
11,564
Reaction score
116
Location
Ruhrpott [Germany]
well it's indeed an italkart..
I'd say an older Elite perhaps (2004 or such?)

is there another torsion bar under the left side of the seat or the mounting spots for one?

also measure the tube diameters the crossbar in front of the seat
and the side rails.. (METRIC!!)
if both is 30mm it's a later Elite (just with older pods installed)
if it's 30 siderails and 32 crossbar it's a pre 2013 for sure,

going by the pods and the dropped front axle torsion bar
I'd say very late 1990s to early 2000s (1998-2004 ish)

(between 2008 and 2017 I think they added a ITALKART Lasercut plate to the lower steering mount.. so it's either pre 2008 or past 2017.. the latter doesn't seem right going by it's overall appearance)

'sid
 

josh7owens

New member
Messages
63
Reaction score
0
well it's indeed an italkart..
I'd say an older Elite perhaps (2004 or such?)

is there another torsion bar under the left side of the seat or the mounting spots for one?

also measure the tube diameters the crossbar in front of the seat
and the side rails.. (METRIC!!)
if both is 30mm it's a later Elite (just with older pods installed)
if it's 30 siderails and 32 crossbar it's a pre 2013 for sure,

going by the pods and the dropped front axle torsion bar
I'd say very late 1990s to early 2000s (1998-2004 ish)

(between 2008 and 2017 I think they added a ITALKART Lasercut plate to the lower steering mount.. so it's either pre 2008 or past 2017.. the latter doesn't seem right going by it's overall appearance)

'sid


Thanks for the reply. I’ll look at the kart tomorrow and measure everything and report back.
 

josh7owens

New member
Messages
63
Reaction score
0
Any moar pics of (guessing ) the miata rally car?

The Miata is a roadrace car that I’m building the cage in and about to put a Kseries in it.
 

Attachments

  • EDFC9338-CDAD-4E65-B232-3992BBE228B8.jpeg
    EDFC9338-CDAD-4E65-B232-3992BBE228B8.jpeg
    786.8 KB · Views: 0

josh7owens

New member
Messages
63
Reaction score
0
Here’s the only other pictures I have on my phone
 

Attachments

  • 02F4C49A-BA98-4DA8-B29D-24B58B2F0B94.jpg
    02F4C49A-BA98-4DA8-B29D-24B58B2F0B94.jpg
    646.4 KB · Views: 2
  • 5B23901D-1B7E-4EC0-8DFD-5C65A1EE9B22.jpg
    5B23901D-1B7E-4EC0-8DFD-5C65A1EE9B22.jpg
    589.2 KB · Views: 1
  • BD36E05B-5FB7-41EF-8139-14E16DEC3AAB.jpg
    BD36E05B-5FB7-41EF-8139-14E16DEC3AAB.jpg
    628.1 KB · Views: 0

itsid

Moderator
Staff member
Messages
11,564
Reaction score
116
Location
Ruhrpott [Germany]
To my eyes that's a 2004/2005 nassau panel (with the dripping nose)

so I'd stick with what I said above ;)

'sid
 
Status
Not open for further replies.
Top