Bushings?

Status
Not open for further replies.

trkk11

New member
Messages
30
Reaction score
0
Location
New Lenox, IL
The other day, I completely disassembled my Yerf Dog project kart and got to thinking about the moving parts. As I have extensive background with cars, I can't help but cringe thinking about metal on metal moving parts. It would be great to add some sort of bushing to the steering and suspension components. The rear swing arm pivots on a bolt, with the brackets touching each other. I was thinking nylon or delrin washers between the brackets might make that operate better/ smoother/ quieter. The front a arms and the steering spindles are just metal tubes between a metal mounting bracket with a bolt through them. I thought maybe a nylon or delrin flange bushing on each end inserted into the tubes, but I'm not sure if the tolerance between the bolt and the inside diameter of the tube will give me enough room. Has anybody done this or attempted something similar? If so, how well did it work or what worked and what didn't? Just figured I'd narrow down my experimenting with others' experiences if I could!
 

jandj

Active member
Messages
1,161
Reaction score
28
Location
Williamsburg, Va
You've hit on what is usually the problem - once you put a bushing in, the original size bolt won't fit.
For regular "yard karts" the answer is a pair of Azusa spindles which are designed to use a nylon bushing and not have to use a smaller diameter bolt.
Afraid I don't have an answer for a Yerf.
For what it's worth, the bushing less spindle tube design has been standard on the vast majority of "traditionally styled" rear engine Karts since about Day One.
Eventually the tube will wallow out but it takes a really long time if you lube it occasionally.
If you're really worried about it, one fix is to drill & tap a hole in the tube and install a grease fitting
The other more expensive option is to bore the tube and insert a sleeve.
 

trkk11

New member
Messages
30
Reaction score
0
Location
New Lenox, IL
I now plan on making those for my steering too, but I don't think they'd hold up on the swing arm..... the swing arm takes WAY too much lateral force for a bearing. If a bearing would be a good idea, there would be bearings in car control arms.
 

trkk11

New member
Messages
30
Reaction score
0
Location
New Lenox, IL
That did also get me thinking about a better solution, though. If I can find a slightly smaller diameter control arm bushing or trailing arm bushing for a car, a nice polyurethane bushing inside an appropriately sized tube welded to the frame of the kart that the u shaped bracket for the swing arm can go on either side of would work perfectly and I'd say be something you'll NEVER have to worry about wearing out or breaking.
 

trkk11

New member
Messages
30
Reaction score
0
Location
New Lenox, IL
I have a Prothane full polyurethane suspension kit for my car that I haven't installed yet.... there's a whole bunch of bushings there that I can measure out. If I find something that'll work, I will begin this feat and post up pics and part numbers. I really think I'm on to something here!
 

crazykart

Crazy member
Messages
1,167
Reaction score
7
Location
Swartz Creek, Michigan
You're right, on a car it wouldn't hold up, not for very long at least. In a car you're talking about more than a ton of weight, plus passengers, at regularly 50+mph through extremely bumpy pot hole filled roads... well here in michigan at least lmao.

Then again bushings don't seem to hold up very well either under those conditions, can't tell you how many times I've had to replace bushings on a control arm that was just recently installed.

The reason car manufactures use bushings is because, well they're cheap, easy to install. If you're designing a vehicle to be mass produced, and the whole point is to make money, then why would you design it to require something that costs $1 each when you can design something that will last about as long, and only costs 10 cents? I digress though.

On a kart thats going to see minimal loads of a few hundred pounds, with them being used purely as a pivot point I'm pretty sure they will hold up excellently. Actually I am betting on it, and that's why I'm using them for both my swing arm, and my A-arms.

But ya, bushings are cheap, and easy to install, bearings are neither lol.
 

trkk11

New member
Messages
30
Reaction score
0
Location
New Lenox, IL
I'm just thinking if I can find a readily available polyurethane bushing, it'll be easier and about 10x more durable..... I've changed my control arm bushings one time (years ago) on my 175k mile car because rubber bushings suck and poly bushings are awesome. I'll get it figured out and do a write up with part numbers. That way between the two of us, we'll be giving others 2 different, both at least semi easy, options for a huge improvement
 

crazykart

Crazy member
Messages
1,167
Reaction score
7
Location
Swartz Creek, Michigan
Yes I'll deffinetly agree that bushings are both easier, and cheaper to do. I will have to say though that I think the bearings would hold up just as well being that they are the same bearings that provide go kart wheels with free spin, and support all of the weight of the kart and rider.

Deffinetly do a write up though as it will be a great wealth of knowledge to others.
 

Sinbad001

Member
Messages
97
Reaction score
0
Location
SE Michigan
^^^Agreed. Bearings are better than bushings. But use tappered rollers to handle loads in all directions. Your cars wheels are on bearings and take more load than you control arm bushings. A motorcycles rear swingarm is mounted on tapered rollers, as well as the entire front end at the steering head.
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
Speaking of bushings. how about those "iolite" bronze bushings rather than polyurethane.
That was my original design on a set of spindles. You see some with nylon bushings so I said the hek with that and put in bronze. Probably would have worked but the rest of that kart design was no good and got scrapped.
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
Here are some pics of the bronze type bushings. I don't know of a source for these off hand, I just had them laying around and put them to good use.
 

Attachments

  • IMG_2956.jpg
    IMG_2956.jpg
    112.2 KB · Views: 9
  • IMG_2958.jpg
    IMG_2958.jpg
    92.8 KB · Views: 14

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
They very well could be. My wife's step dad left quite the auto mechanic "hoard" on our property when we inherited it.
 

trkk11

New member
Messages
30
Reaction score
0
Location
New Lenox, IL
Thank you for your concern Denny, but I have filled out the location in my profile a couple of times and it still doesn't show up. I don't know why it isn't working, but I will go ahead and do it again. In case it doesn't work AGAIN, I live in New Lenox, IL, which is about 35 minutes southwest of Chicago
 

firemanjim

Just kartin' around....
Messages
5,247
Reaction score
88
Location
Houston Texas
I hope bearings work in a swing arm...... I have 2 standard sealed high speed 5/8"ID bearings loaded into each pivot/bearing cup. I foresee no problems with my set up, even at 50+mph.....
You can use this same concept for steering and other suspension systems. It's just basic common engineering. Just remember that there needs to be a tube between the inner races, or you will end up with bearing bind....... :eek:
 

Attachments

  • IMG_20141026_185048.jpg
    IMG_20141026_185048.jpg
    81 KB · Views: 13
  • IMG_20141123_153454.jpg
    IMG_20141123_153454.jpg
    134.2 KB · Views: 12

Denny

Canned Monster
Messages
12,068
Reaction score
8,608
Location
Mayberry, Indiana
New Lenox Ill. I've been there before. :mad: Go to Tractor Supply they usually have a nice selection of the larger size bronze olite bushings. If they ain't in stock they can get them. :wai:

Denny
:feedtroll:
 
Status
Not open for further replies.
Top