Burning up clutches

Status
Not open for further replies.

mdv77632

New member
Messages
2
Reaction score
0
I bought this Chinese made gokart and tore out the old motor and electrical and put a 6.5hp predator motor on. It seems to me I under sized the motor but I may be missing something. I burned up two clutches so far. Any help would be appreciated. Attached pics.
 

Attachments

  • SAM_0537.jpg
    SAM_0537.jpg
    390 KB · Views: 20
  • SAM_0536.jpg
    SAM_0536.jpg
    318.5 KB · Views: 13

itsid

Moderator
Staff member
Messages
11,563
Reaction score
261
Location
Ruhrpott [Germany]
also, that axle sprocket IS WAAAAY too small..

that looks like it's been used for a 150cc gy6 (twice the power)

for a single seater kart, you might get away with that (only buying a new clutch every year...)
a two seater...

nope

not even with a TC I'm afraid you'll not burn clutches anymore -that's true.. but belts are exactly as expensive ;)
and those will fry just as quickly.
That is, if I'm correct and that axle sprocket has less than 76 teeth which I'd recommend for a twinchair kart and a series 30 (10T TC sprocket)

'sid
 

cavfire

Member
Messages
110
Reaction score
1
Location
auburn, georgia
A torque converter is pretty much required, and on top of that some engine mods would probably help with a kart that heavy. Speaking from experience, swapping the cam out on a 196cc powered Blaster 65 dual suspension pig was one of the best purchases I made.
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
A torque converter is pretty much required, and on top of that some engine mods would probably help with a kart that heavy. Speaking from experience, swapping the cam out on a 196cc powered Blaster 65 dual suspension pig was one of the best purchases I made.

This is not directed at you cavfire....but you opened the door...extra hp does not help in any way shape or form....

To put in the simplest anology I can think of: you have a V-8 in a four cylinder car that's burning up clutches....so...building up that engine for more horsepower is going toHELP? ??

SOOOO....to continue with the analogy...it has skinny rear tires....soooo....put on some bigger ones....

(That's basically saying "put on a torque converter ")....

Sooo....what's the point of this analogy? The real problem is the 4 cylinder drivetrain. And the real problem here....(and so often otherwise) is GEARING! !!!

That's the analogy of the 4 cylinder car...It's just wrong for the application....and unless you address the proper weak points....you can throw a lot of money in the wrong directions....

Burnt clutches aren't a problem....they're a symptom ....
 

cavfire

Member
Messages
110
Reaction score
1
Location
auburn, georgia
I can definitely agree with what you say Poboy. I didn't want to get too long winded in my first reply with itsid already pointing out the tall gearing, but I'll admit to going from 6:1 to 7.5:1 gearing myself.
 

mdv77632

New member
Messages
2
Reaction score
0
This is my first time doing this so bear with me. What I'm hearing is if I keep the motor I need to change the gearing or make modifications. Or just get a bigger motor?

Appreciate all the feed back and help!
 

itsid

Moderator
Staff member
Messages
11,563
Reaction score
261
Location
Ruhrpott [Germany]
if by bigger you mean the "original engine" then yes... bigger engine will do;
if you think of a more powreful predator... then NOPE;
the gearing will have to be changed; even a more powerfull engine might struggle with a ratio like that;
simple reason : industrial engines have absolutely NO INTERNAL gear reduction, all scooter/atv/vehicle engines I know do.
And that must be accounted for.

'sid
 

cavfire

Member
Messages
110
Reaction score
1
Location
auburn, georgia
MDV there's no getting around the gearing unfortunately. On a kart like yours I'd pony up for a series 30 torque converter, either $80 knockoff on ebay or $200 Comet from MFG Supply, 60 tooth 40/41 pitch rear sprocket, chain, and would probably pick up a 8 or 9 tooth sprocket for the torque converter. They generally come with a 41 pitch 10 tooth which would put you at 6:1 with a 60 tooth rear.
 
Status
Not open for further replies.
Top