built clone vs built 2 stroke.

Status
Not open for further replies.

chuck

New member
Messages
8
Reaction score
0
im laying the plans out to build a hell of a shifter kart. it will be visiting tracks like summit point but also used to mess around on.

but i cant decide if i want to build a clone with porting/valves/cam/billet rod. i dont beleive the flywheel will explode so i wouldnt go billet. ive seen flywheels with alot less meat turn 20k with no problem. it would also run alcohol.

OR

i would get an old school 250 2 stroke dirtbike motor and ultimately end up turning it into a completely different machine (i know 2 stroke performance like the back of my hand.)

im really leaning toward the bike motor but im considering the clone because i could be riding sooner and spend less money.

any opinions,criticism etc welcome.
 

sideways

Unfinished projects king.
Messages
1,501
Reaction score
2
Location
Perth, Western Australia
im laying the plans out to build a hell of a shifter kart. it will be visiting tracks like summit point but also used to mess around on.

but i cant decide if i want to build a clone with porting/valves/cam/billet rod. i dont beleive the flywheel will explode so i wouldnt go billet. ive seen flywheels with alot less meat turn 20k with no problem. it would also run alcohol.

OR

i would get an old school 250 2 stroke dirtbike motor and ultimately end up turning it into a completely different machine (i know 2 stroke performance like the back of my hand.)

im really leaning toward the bike motor but im considering the clone because i could be riding sooner and spend less money.

any opinions,criticism etc welcome.

Bike engine X295761879462980

No mater how modified a clone is, it wont come close to touching the performance of the bike engine.
 

karl

Well-known member
Messages
2,449
Reaction score
719
Location
North east Ohio
250 dirtbike all the way. More power, less money, powerband, 5 or 6 speed, manual clutch, and one more thing- the dirtbike makes way over triple the power. Price out all those parts.
BTW- CENTRIFUGAL CLUTCHES SUCK They are one set speed so the engines power is best used only at one point, having a transmission would be way better. Its like driving your car in 2 or 3 gear around town.
 
Last edited:

South Kart3377

Kart designer
Messages
377
Reaction score
2
Location
Va
250 dirtbike all the way. More power, less money, powerband, 5 or 6 speed, manual clutch, and one more thing- the dirtbike makes way over triple the power. Price out all those parts.
BTW- CENTRIFUGAL CLUTCHES SUCK They are one set speed so the engines power is best used only at one point, having a transmission would be way better. Its like driving your car in 2 or 3 gear around town.

:iagree: I hate centifugal clutches too. Clones can hurt your wallet.


South Kart3377
 
Last edited:

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
It wouldnt be a shifter kart if you had a clone on it. Modding a clone is a fun way to learn a bit mroe about engines but more expensive than a bike engine.
 

draike66

New member
Messages
1
Reaction score
0
Location
Vidor,Tx
Clones to explode, it happened to me on a horbor freight 6.5 with very few modificati

:oops:
im laying the plans out to build a hell of a shifter kart. it will be visiting tracks like summit point but also used to mess around on.

but i cant decide if i want to build a clone with porting/valves/cam/billet rod. i dont beleive the flywheel will explode so i wouldnt go billet. ive seen flywheels with alot less meat turn 20k with no problem. it would also run alcohol.

OR

i would get an old school 250 2 stroke dirtbike motor and ultimately end up turning it into a completely different machine (i know 2 stroke performance like the back of my hand.)

im really leaning toward the bike motor but im considering the clone because i could be riding sooner and spend less money.

any opinions,criticism etc welcome.
 

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
will be visiting tracks like summit point but also used to mess around on.


i would get an old school 250 2 stroke dirtbike motor


I checked out the Summit website: http://www.summitpointkart.com/index.php?option=com_content&view=article&id=73&Itemid=48

I saw they rent 2 types of karts for most all their races/events, but they also do let you bring your own kart to practice on the track, but I couldn't find any info about actual races where they allow your own kart. (have you asked summit about this?)

I saw that summit rents 250cc shifters, but the thing about shifter karts you should realise here is most all kart-race tracks in the USA only allow either 80cc or 125cc /2-cycle motocross type engines to compete in the shifterkart race classes.

There are a couple tracks in the USA that do have a class for 250's, but.. I think you would be much better off installing something like a CR125 in your kart for a few reasons:

#1- They're still wicked fast.
(many times 125's are actually quicker than 250's on smaller tracks because they're lower power is more manageable and easier to hook up to the ground)

#2- If you decide to get into racing shifters at kart tracks you'll find most all tracks have a regular 125cc class, but very few tracks would allow a 250cc to race, or even allow them on the track for practice sessions...
(call/email several tracks in your area to see if I'm right or not)

#3- If you ever sold your shifter kart, it would most likely be WAY more desirable, and have more resale value as a 125cc than a 250cc, because your prospective buyers could actually race it at most any kart tracks in the USA.
(very few people buy shifter karts just to play around on, they're usually hard-core kart racers)
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
Now, draike, what did you do to your clone that you had it "blow up with very little modifications"? And what exactly happened? Many of us on here, myself included, have used and use clones, stock or modded, with great success.
 

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
Now, draike, what did you do to your clone that you had it "blow up with very little modifications"? And what exactly happened? Many of us on here, myself included, have used and use clones, stock or modded, with great success.

:iagree:

There must be something(or alot) he's left out.
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
Heck, people rip them down to the block and use that as a base for new guts, a new head, a new carb and intake, maybe fuel pumps, new exhaust (and what ever I've over looked or wrapped into "new guts") and the blocks hold up just fine under those extreme stresses. He probably didn't do something right or didn't upgrade something that stock parts can't take.
 
Status
Not open for further replies.
Top