Buddy told me to get a set of rings and gaskets

[Bansil]

He gave me this

What is it and best place to get rings and gaskets?

I assume piston would be stamped with size , still has cross hatch and he will wipe hone Realquick

Tia

 

[karl]

He gave me this

I do not think those numbers are of much use, so many clones about.

Does he have the brand name, or displacement?

Just a bore measurement would get things going, for the real honda engines, the gx160 and gx200 use the same piston.

How bout something like this? Piston should be 68mm

https://www.ebay.com/itm/Rebuild-Gaskets-Kits-For-Honda-GX160-GX200-5-5HP-6-5HP-Piston-Rings-Insulator/123048093863?hash=item1ca63ce8a7:g:2U4AAOSwQqdavI4i

 

[Bansil]

He literally walked my office and said find parts

I will tell him to strip it down and measure bore, conecting rod and stuff, he knows what he is doing with V8s it these magical little ones that through us off.

I didn't think to measure stuff on these, hopefully by the end of summer there will be 3 old farts on karts bombing the fields

Thanks for the link, so definitely just need measurement of key parts, I thought it might be tougher

Thanks!

 

[mckutzy]

As I understand.. the 168F is a common marking for the 196cc Chinese engine's...