gokarttimmy
Member
I have a BSP clone engine that I haven't yet used.
Do I need to check all the torque on the bolts, or can I just put on a flywheel and everything else and run it out of the box?
Would a 22mm Mikuni work better than the clone carb?
This is for track time, but not racing-so a good overall setting is preferred.
Thanks for any opinions.
Do I need to check all the torque on the bolts, or can I just put on a flywheel and everything else and run it out of the box?
Would a 22mm Mikuni work better than the clone carb?
This is for track time, but not racing-so a good overall setting is preferred.
Thanks for any opinions.