Briggs wiring

Status
Not open for further replies.

SmallEngineDave

New member
Messages
28
Reaction score
0
So i started workin on this briggs I got from the schools shop teacher. Theres 2 wires coming out from under the flywheel, i guess from the points and condensor. Im guessing that the wire with the ring goes on one of the coil mounts screws, but where does the one with the solder go?
 

Attachments

  • 101_0552.jpg
    101_0552.jpg
    80 KB · Views: 13

SmallEngineDave

New member
Messages
28
Reaction score
0
I know how it grounds and stuff. This wire actually hooks up to a wire coming out the back of the coil. I dont see a kill wire, but I could put a switch between that wire and the one from the coil, and just interupt it to kill it
 

Clayton

New member
Messages
294
Reaction score
0
Location
Saskatchewan, Canada
I could let you know exactly how it goes in a couple days, I have to redo all the wiring and replace coil and points/condenser on my 3hp briggs flattie.
 
Status
Not open for further replies.
Top