Briggs Intek Help

Status
Not open for further replies.

cmbone

New member
Messages
78
Reaction score
2
Location
WA
Hi, I have a Briggs 8hp Intek Engine, I got it new back in 2002. & i have had to replace the carb twice. Is there a place i can get a new carb for this engine? Or an aftermarket carb thats better. Is there inherent problems with the carbs on these engine's? I always use fresh fuel, Its never in the weather.
I use Stabil. Maybe its the alchol thats in the gas nowadays?:surrender:
Seems like it would make a dandy kart engine?
 

slideways

New member
Messages
575
Reaction score
6
What about the carb is making you replace it? Do you know how to clean it correctly? I've always found the Intek carbs to be very simple and good on performance out of the box. The stabil should take care of the ethanol problem as long as you are running it in the tank for a little while before you store it.
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
Usually, the only reason to replace a carb is if the throttle shaft gets worn and sloppy...

I'm with slideways, what is it doing / not doing?
 

cmbone

New member
Messages
78
Reaction score
2
Location
WA
I respect people who can clean carbs, correctly!

What about the carb is making you replace it? Do you know how to clean it correctly? I've always found the Intek carbs to be very simple and good on performance out of the box. The stabil should take care of the ethanol problem as long as you are running it in the tank for a little while before you store it.

Hi, Cleaning carbs for me is poopie work lol! No really...I hate it.
Gas & carb cleaner, & the wifey naging about the smell, coming from the shop.
So whats a guy to do. Take it to the profeshional, The :sifone:small engine guy.
He, says he fixes it. OK... how much... $75 .....OK, Run It....
Still only runs right with the choke on one click....:toetap05:
I says, the carb aint fixed if i gotta have the choke on? he says well i fixed it. then i says put a new carb on. he says that will be $100. I says cant you give me a break since you never fixed it right? Ok he says i wont charge you the labor.:roflol:
A year later it dont run right again. I filled the motor with oil & I pushed it under a tree. Its been there for 2 years now.
All i know is i have 4 lawn tractors, with 4 different engines & i treat them all the same, but this Intek carb give's me more problems then all of them.:2guns:
 

slideways

New member
Messages
575
Reaction score
6
If your wife cant stand the smell of a little carb cleaner from OUTSIDE the house i think its time to either get a new hobby or a new wife.

The new gas like i said is going to raise hell in all of your carbs from now on. Stabil is your only defense. And being able to completely.... completely. Disassemble the carb and blow it out and reinstall it correctly.
 

cmbone

New member
Messages
78
Reaction score
2
Location
WA
Oh no, I cant get rid of the wifey

If your wife cant stand the smell of a little carb cleaner from OUTSIDE the house i think its time to either get a new hobby or a new wife.

The new gas like i said is going to raise hell in all of your carbs from now on. Stabil is your only defense. And being able to completely.... completely. Disassemble the carb and blow it out and reinstall it correctly.

I cant get rid of the wifey! Thats the only cardio i get~:sifone:

What about Colman fuel ?, (White gas) We have used this in our small gasoline 2 stroke racing engines. Smells like camping when your racing! & Wont stink up the house.
only problem, Twice the cost of unleaded.
 

cmbone

New member
Messages
78
Reaction score
2
Location
WA
Hi, Jam! What a great idea! Looks like i get to start learning how to find the carb rebuild kits. Do i just need the number on the side of my engine? Where can i find the rebuild kits?
Thanks!! :)
 

slideways

New member
Messages
575
Reaction score
6
You shouldn't need a rebuild kit for a new carb that is just clogged up with junk. There is only about 6 parts to the entire thing.

Remove and disassemble, then use carb cleaner and compressed air to clean every air passage and hole in the carb. A complete tank of fresh fuel and you are good to go.
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
Yup, unless you have a gasket that's torn up, or the needle valve's seat is so compressed it won't seal, you ought to see a huge improvement with just a good thorough cleaning.

With carburetors, cleanliness isn't NEXT to godliness, it IS godliness!
 

cmbone

New member
Messages
78
Reaction score
2
Location
WA
Thanks!

Yup, unless you have a gasket that's torn up, or the needle valve's seat is so compressed it won't seal, you ought to see a huge improvement with just a good thorough cleaning.

With carburetors, cleanliness isn't NEXT to godliness, it IS godliness!


Thanks!
I know starting fluid will ruin the seat. If i do need parts. How & where do i find them? I cant find any for the intec online or ebay.:eek:
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
Thanks!
I know starting fluid will ruin the seat. If i do need parts. How & where do i find them? I cant find any for the intec online or ebay.:eek:
Try looking for parts based on the engine series number, I've had much better luck with that.
 
Status
Not open for further replies.
Top