briggs flathead wont run

Status
Not open for further replies.

verdebmxer47

New member
Messages
33
Reaction score
0
Location
Sioux Falls SD
i just built a briggs 5hp flathead and cant seem to get it to run. it has good spark and the only time it will run is with starting fluid and it will only run for literally 2 seconds

ive cleaned the carb super well but im starting to think the carb might be my problem because i cant seem to get fuel to go through the carb.

Any thoughts on what i should do?
 

KartFab

Active member
Messages
3,381
Reaction score
60
Location
Dallas, TX
Run a pulse pump from the crankcase vent, and run a mikuni carb with an adaptor that fits the briggs engine?
 

OzFab

Well-known member
Messages
15,615
Reaction score
76
Location
Warwick Qld, Australia
That depends on the stock carb

:useless:

If it's a suction carb (tank mounted under carb) the most likely scenario is the pump diphragm is toast...
 
Status
Not open for further replies.
Top