briggs flathead problem...

Status
Not open for further replies.

kazkepox

Pro- one idea to the next
Messages
723
Reaction score
0
Location
Panama City, Florida
hey guys, i got a briggs flathead im using on my kart and it runs pretty well, I want to tear it down and clean everything, but the problem i have right now is that, whenever i am running it, it wants to shut off everytime i make a turn, it doesnt shut off imediately, it jus tkinda sputters about. then just quits. any ideas?
 

DirtTrackRacer_07

DeeR SlayeR
Messages
222
Reaction score
1
Location
tennessee
pulll the carburator and check you pickup tubes sounds gas is sloshing away from em or mite be a killswitch wire movin around bumpin something and grounding out but i bet its the carb

as far as cleaning it it wouldnt hurt to rebuild it and replace the gaskets if thats wat your talkin bout it can never hurt em
 

fowler

New member
Messages
5,463
Reaction score
18
Location
Bullsbrook West Aus
there is a wire going into the sump almost at the bottom pull the plug ot and tape each end off
try and start the engine if it wont u got the wrong wire so by that measure aviod cutting anything
 
Status
Not open for further replies.
Top