Briggs and stratton engine

Status
Not open for further replies.

DS13

Annoying the Neighbors!!!
Messages
437
Reaction score
0
Location
Elysburg, PA
Im building a single person gokart in my shop class and i was looking at the briggs and stratton engines but i didnt know which to chose the m series looks awesome and so does the formula engine... i dont want to spend a grand on the formula but the m series looks good.... does anyone have one of the briggs and stratton engines and does it work for what you bought it for
 

souperman000

New member
Messages
2,466
Reaction score
11
Location
Westlake Village, CA
We need a few details first:

- How heavy is the frame?
- How heavy is the rider?
- What terrain is the kart going to be ridden on?
- How fast do you want it to go?

We need some of this info before we can totally help you. BUT, IMO Briggs are kinda expensive, why not go for a 6.5hp Harbor Freight clone instead?
 

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
Yeah i wouldent invest in a new briggs. An 80-90s definantly, i would pick up a harbor frieght clone, like souperman mentioned. We need to know your conditions aswell to suggest the right engine.
 

DS13

Annoying the Neighbors!!!
Messages
437
Reaction score
0
Location
Elysburg, PA
We need a few details first:

- How heavy is the frame?
- How heavy is the rider?
- What terrain is the kart going to be ridden on?
- How fast do you want it to go?

-Frame is around 30lbs
-I'm around 150lbs
-Terrain= roads (im gonna use slicks i think for tires)
-I wanna go fast
 

DS13

Annoying the Neighbors!!!
Messages
437
Reaction score
0
Location
Elysburg, PA
Im thinking it that light im not sure... it could be between 30 and 50 when finished right now its around 20 because its just the bare frame
 

DS13

Annoying the Neighbors!!!
Messages
437
Reaction score
0
Location
Elysburg, PA
Id say around 30 to 40 mph the harbour freight engine looks great and its cheaper than the engine i was looking at
 

klicky96

New member
Messages
558
Reaction score
1
Location
Sandusky, Ohio
Id say around 30 to 40 mph the harbour freight engine looks great and its cheaper than the engine i was looking at

Oh you say you wanna go fast?!?! Okay

http://www.bmikarts.com/item/GY6-150cc-Engine-200020-6578

I believe, if you saved up for this, you could probably hit around 60-70MPH with the right gearing. It is forced-air cooled, with a chain-driven overhead camshaft and a crossflow hemi head. With a 149.6cc displacement, you would run a 8.8:1 Compression ratio, with 8.6HP at 7,000 RPM
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
My mate has a buggy with a gy6 clone. It topped out a few mph higher than my 6.5hp clone with the governed removed and a tc.
It ha better hill power though. I now hope my clone with $200 spent on it will beat his gy6. I have both displacement and probably torque advantage over him now. He may have rpm.
BTW we were both hitting around 40mph (maybe me at 35) so 60 may be possible, but sounds a little over realistic.
What are you hoping for? 10mph is fast for some, 90mph is fast for others.
Also are you looking for lots of bottom end?
 

klicky96

New member
Messages
558
Reaction score
1
Location
Sandusky, Ohio
I might go buy this gy6 after doing some research on it. It safely hits 10-11,000 RPM. Thats pretty awesome. with this guys frame so light, it'd lift up the front if he doesn't ease into the throttle.
 

DS13

Annoying the Neighbors!!!
Messages
437
Reaction score
0
Location
Elysburg, PA
that gy6 looks awesome but i think im gonna start with a smaller engine at first just because this is my first gokart... if i have a need for speed which will probably happen i may change it out for the gy6
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
I would not. Children have this tendency to grow. If you buy a larger engine, the kart can grow with them, simply by regearing. If you cheap out and buy an engine that's "the right size" for them NOW, you'll pay for it later- literally- when you have to buy another, bigger engine.
 

DS13

Annoying the Neighbors!!!
Messages
437
Reaction score
0
Location
Elysburg, PA
Ive decided to go with the 420cc engine from habor freight... thanks to everyone who posted help
 
Status
Not open for further replies.
Top