Briggs 5HP Mixture Screw

[microflitedude]

Hello everybody.

I have an older Briggs 5HP Fun Power. I recently rebuilt the carb and got it running again.

One thing I am not sure about is where to position the mixture screw. (the one on the bottom of the carb where the tank meets) I have seen instructions from 2 turns out to 1/8 of a turn out.

It's on a little 1WD Manco.

Thanks in advance, Matt

 

[microflitedude]

Nothing?

 

[MrNoizyToyz]

2 1/2 turns

 

[OzFab]

Mixture screw settings are not exact or universal, simply a guide.
Set it at about 2 turns out, but then you'll have to play around with it until you get it spot on

 

[microflitedude]

Thanks guys.