Brake Caliper Help Needed

[Slik]

This is my first time building, well restoring better said a go kart. It has a 150x1 Hurst Airheart hydraulic brake installed but I don't know how to get the brake pad on the caliper. I think it has everything it needs, but I've had no luck figuring it out. Any resources I can refer to or people who can help me out?

 

[anderkart]

You can download instructions here: http://www.airheart-brakes.com/partsheets_airheart.html

Speedway Motors has those pucks in stock at this link: http://www.speedwaymotors.com/Airheart-Brake-Friction-Puck-for-150x1-Soft-Lining-Replacement,60.html

 

[jandj]

IIRC, the puck on the anvil attaches with a screw through a recessed hole and the one on the piston side is glued on.
Keep in mind you have a single piston fixed caliper so the disc has to float.

 

[Can Funded]

IIRC, the puck on the anvil attaches with a screw through a recessed hole and the one on the piston side is glued on.
Keep in mind you have a single piston fixed caliper so the disc has to float.

This is correct, I have the brake setup on my kart. I used contact cement to keep the piston side pad on.

What type of kart do you have?

 

[jandj]

I realize you're asking the OP, but I have the Airheart brake on a project Robron SuperDart with an 820 West Bend.

 

[Slik]

I'm not sure exactly what type of kart it is but I'll post some pictures if you'd guys like to see

 

[Can Funded]

I realize you're asking the OP, but I have the Airheart brake on a project Robron SuperDart with an 820 West Bend.

Nice. I have Bug Stinger.

I'm not sure exactly what type of kart it is but I'll post some pictures if you'd guys like to see

I would.