Blueprints of go kart chassis

[LSDOG]

Do you know where I can find blueprint of go kart chassis?
And also buy this chassis

 

[Hellion]

Oh I'm sure of it, but "go kart chassis" is a broad, broad spectrum. What kind of go kart are you looking for?

 

[LSDOG]

Oh I'm sure of it, but "go kart chassis" is a broad, broad spectrum. What kind of go kart are you looking for?

Racing

 

[Hellion]

Professional racing or you just want to go fast?

Oh, look what I found with a 30 second search of the interwebz: https://kartfab.com
He's actually a member here.

 

[LSDOG]

Professional racing or you just want to go fast?

Oh, look what I found with a 30 second search of the interwebz: https://kartfab.com
He's actually a member here.

Not helping me

 

[Hellion]

Your lack of specifics isn't helping me or anyone else.

Just go buy a racing kart chassis and go race.

 

[LSDOG]

Professional
Less then 3s to 100km/h

 

[LSDOG]

Your lack of specifics isn't helping me or anyone else.

Just go buy a racing kart chassis and go race.

But I need the blueprints, the length and width of every component

 

[anderkart]

I don't have any blueprints but here's some measurements of my Biesse B1 Sprint Kart:

Chromoly frame rails are 33mm. diameter with a 3mm. wall thickness.



You'll find more pics of this kart here: https://www.diygokarts.com/community/threads/my-race-kart-project.3664/

 

[LSDOG]

I don't have any blueprints but here's some measurements of my Biesse B1 Sprint Kart:

Chromoly frame rails are 33mm. diameter with a 3mm. wall thickness.

View attachment 126950

You'll find more pics of this kart here: https://www.diygokarts.com/community/threads/my-race-kart-project.3664/

I only need the size of the sides for putting there 1404 batteries in 2 sides, 702 each

This is not the frame that I will use but thanks

 

[LSDOG]

I don't have any blueprints but here's some measurements of my Biesse B1 Sprint Kart:

Chromoly frame rails are 33mm. diameter with a 3mm. wall thickness.

View attachment 126950

You'll find more pics of this kart here: https://www.diygokarts.com/community/threads/my-race-kart-project.3664/

Cl30-DD S12 KF-TAG
The frame looks like this and between the seat to the right and left wing I am going to put the batteries

 

[landuse]

I unfortunately don't think you are going to find any plans for the kart that you have. You are just going to have to wing it!

 

[Bansil]

so you want to get plans for a 1 off, custom dual battery electric racing kart? hugh, never knew they raced them do you have a copy of the spec sheet we can look at?

 

[Functional Artist]

Check out Excalibur
...the "build" may have some info that will help

(4) 2020 - Excalibur Electric Racing kart | DIY Go Karts

 

[ezcome-ezgo]

 

[Karts of Kaos]

not sure what youre looking for but i have this

 

[raceDriver]

Go kart arzlarının planını nerede bulabileceğimi biliyor musun?
Ayrıca bu pazarları satın al

Bu planın tam boyutlu çizimini yere yaptım. Boyutlar neredeyse mükemmel. "Planı Pinerest'te dolaşırken buldum" (çeviri için özür dilerim)

 

[Hellion]

I made a full size drawing of this plan on the ground. The dimensions are almost perfect. "I found the plan while wandering around Pinerest" (sorry for the translation)

Thanks for the contribution, raceDriver! This is an old thread from 2021 but I didn't see it until now. Information is information regardless of the date. Welcome to the forum!

Katkın için teşekkürler, yarış sürücüsü! Bu 2021'den kalma eski bir konu ama şimdiye kadar görmemiştim. Tarih ne olursa olsun bilgi bilgidir.
Foruma hoş geldiniz!

 

[raceDriver]

Katkın için teşekkürler raceDriver! Bu 2021'den kalma eski bir konu ama şimdiye kadar görmemiştim. Tarih ne olursa olsun bilgi bilgidir. Foruma hoş geldin!

Katkın için teşekkürler, yarış sürücüsü! Bu 2021'den kalma eski bir konu ama çıkana kadar görmemiştim. Tarih ne olursa olsun bilgi bilgidir.
Foruma hoş geldiniz!

thanks

 

[Edwin Spangler]

Bahhh Ive been had! Liked a comment from 2021!