Best way to convert to a 390 carb

[Flyinhillbilly]

So I ordered a 390 carb for my modified and the butterfly works backwards from the original carb. How are you guys solving this problem?

 

[Tpdingo]

So I ordered a 390 carb for my modified and the butterfly works backwards from the original carb. How are you guys solving this problem?

Letting the butterfly reverse metamorphosis into a caterpillar throttle.

 

[bthompson224]

Can you move the linkage to the other side?

 

[65ShelbyClone]

The 390 butterfly should open in the same direction as a GX200 carb.

 

[Flyinhillbilly]

It works backwards from it looking at it from the top. I got it sorted out though.

 

[65ShelbyClone]

The one in the picture is standard. The original must have been backward is all I can figure.

 

[bob58o]

The 390 butterfly should open in the same direction as a GX200 carb.

What you talking about Willis?
The linkage needs to move in the opposite direction.

Nate saw this already but I’ll post it here too for those who might stumble upon it later.
https://youtu.be/Ametg3W56XE

 

[65ShelbyClone]

What you talking about Willis?
The linkage needs to move in the opposite direction.

The linkage, yes. The butterfly, no; they both open CCW. Based on the original post, the latter is what I though was meant.